Jump to content
SAU Community

M35 Screen Flicker

MOUTH

By MOUTH,
in Four Door Family & Wagoneers

 Share

Recommended Posts

MOUTH Collaborator

MOUTH

Posted
Posted (edited)

So I have pal to ntsc converter (when a pal ps3 is hooked to the screen its black and white/wrong etc), a 1000w inverter and a spare ps3 (missus won in a competition). I was thinking for long drives etc for mates to watch vids/play games etc with 120gb of video/audio it would be the goods......So I hooked it all up in the back (above the spare wheel in that compartment) and I get a screen flicker thats quite bad (audio is fine). I have old thick gauge wirring that was to an amp in the back straight powered to the inverter and have tried hooking it straight from the battery (20 cm leads) to eliminate the wirring side of things.

Thought it must be interference with the inverter, so hooked up an extension cord to mains power and I still get the flicker :blink: .

When I have my creative mp4 player hooked up to the screen I have no issues at all (no flicker etc) video is ok......

So has anyone had a ps3/xbox or what ever hooked up to there M35 screen? Or has anyone had screen flicker issues with there M35?

I havent played around with it for long and my searches on the net don't come up with any solid info, any ideas from the electronics gurus on here?

Edited by MOUTH
Link to comment
https://www.sau.com.au/forums/topic/381328-m35-screen-flicker/
Share on other sites
MOUTH Collaborator

MOUTH

Posted
  • Author
Posted (edited)

i get flicker on the WD Live media player. but didnt with the new asuka tv tuner

there is probably interference in the car, use sheilded coaxial cabling.........

Hey mate I take it you were using an inverter to use the wd player? Last night I tried a xbox360 and ps2 all the same...... and then tried another screen I had laying around and it was fine. So its something to do with the factory screen and some interference between with ps3/pal to ntsc convertor and and the screen.

Edited by MOUTH
Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

I remembered my screen use to get a bit of green waves and loose colour when then Vpp is to high. The screen likes a peak to peak voltage of about 1 volt. So if you measure the RCA plug from the shileld to the core on DC it should be around 1 volt when turned on.

I had a device that put out 2-3 volts peak to peak and the screen didnt like it.

In the specifications for the PS3 it should tell you the Vpp

Or I agree with the possible Hz difference between PAL and NTSC but saying that I would think the converter would sort that out otherwise its not really converting PAL to NTSC

Was the other screen you tried a NTSC or PAL screen and did you have the converter when you used the other screen if so it cant be the converter.

If you get really stuck you can bring it out and Ill have a look

MOUTH Collaborator

MOUTH

Posted
  • Author
Posted

I remembered my screen use to get a bit of green waves and loose colour when then Vpp is to high. The screen likes a peak to peak voltage of about 1 volt. So if you measure the RCA plug from the shileld to the core on DC it should be around 1 volt when turned on.

I had a device that put out 2-3 volts peak to peak and the screen didnt like it.

In the specifications for the PS3 it should tell you the Vpp

Or I agree with the possible Hz difference between PAL and NTSC but saying that I would think the converter would sort that out otherwise its not really converting PAL to NTSC

Was the other screen you tried a NTSC or PAL screen and did you have the converter when you used the other screen if so it cant be the converter.

If you get really stuck you can bring it out and Ill have a look

cheers brad will check it out

MOUTH Collaborator

MOUTH

Posted
  • Author
Posted (edited)

dude, why are you using a PAL to NTSC converter?

the PS3 will output NTSC from the composite video cables......

Tried this in the first place, black and white and screen flicker, with the convertor I get color.........and screen flicker....On the ps3 website it also says PAL for composite output (obviously if your in a pal region)

http://manuals.plays...ideooutput.html

Now reading this also I have just seen that it will only out put 576i through Pal composite..... whats the max that our ntsc screens do? 480i? Then this maybe the problem?

Edited by MOUTH
zei20l Grand Master

zei20l

Posted
Posted

its not even 480! its analogue. with the 'Leon' tuner i got a perfect picture on the 576i/p setting, the 480p setting wasnt quite right.

just muck around with the PS3, i swear i can change mine to NTSC in the setup menu - of the PS3

MOUTH Collaborator

MOUTH

Posted
  • Author
Posted

its not even 480! its analogue. with the 'Leon' tuner i got a perfect picture on the 576i/p setting, the 480p setting wasnt quite right.

just muck around with the PS3, i swear i can change mine to NTSC in the setup menu - of the PS3

Sorry didn't even think about the digital-analog (480etc).........:unsure:

99.9% sure I cant change it to ntsc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • GTSBoy
      Slight brake pedal stutter after new pads

      By GTSBoy · Posted

      It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • Looney_Head
      R32 gtr transmission strength, billet plate

      By Looney_Head · Posted

      no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...