Jump to content
SAU Community

Recommended Posts

Hi all, picked up our 01 m35 last weekend.While we love the car for its size(have kids) and looks, have had a few issues stopping me from seeing what the car is really like(if you know what i mean).

Firstly the exhaust had a blockage and a leak so had the 4 tonne boat anchor taken out and replaced. But the turbo would appear to be having issues,it whistles quite loudly(i am comparing this to my subaru i just got out of)but also sounds like it has a slight leak.My mechanic checked it out and it has no leaks so this week he is going to check the turbo,seems to think that the compressor is rubbing on the housing (i think thats what he said lol) has anyone had to deal with this before any help would be appreciated.

Anyway great forum with heaps of info

this is her, i will give it a good clean and polish this weekend

P1020214.jpg

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/
Share on other sites

Mine is the same with the whistle. I was told it was a sign the turbo was out of balance, but all of them seem to be like that.

I think it's just inevitable that you'll have to replace the turbo, but the whistle isn't automatically the sign.

Oh and exhaust out is great, just make sure you do the dump pipe too! There are a few options now depending where you are. Scotty on here does them, and AM Performance in Adelaide do them. These seem to be the proven options.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107958
Share on other sites

Congrats on the new purchase, looks good.:thumbsup:

The turbo on these is quite noisy anyway, so you may not necesssarily have an issue, but it might be worth getting your mechanic to check out the oil feed banjo bolt to the turbo, while he's poking around; to check for blockage. If you've freed up a blocked exhaust; you're probably getting proper boost now, hence the extra noise.

My turbo has been noisy since I bought it, and 45000km later still going strong; not any noisier, but I did pull the banjo out and drill it to 2mm.

Best of luck, and enjoy the new toy.

Cheers, Dale

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107986
Share on other sites

I have a stock turbo here thats nearly silent so the noise could be either the front wheel rubbing (turbo is flogged) or usually its the rear bearing on its way out (like Dale said, drill the banjo restrictor out) Dont stress, it could last years like that if it has a good oil supply.

Changeing the T3 manifold gasket with a new oem one could be a good idea too, its a pain to get in to though.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6108149
Share on other sites

These all have a loud whistle, mine does and i have test driven loads of them with all the same load whistle, a turbo upgrade would be the way to go if you need it but these ones run fine on factory 14psi. I ripped out my factory exhust and replaced with 3'' big bore but had change the rear muff as it was just too loud for us on long trips.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109118
Share on other sites

As I have stated before, this is probably the main reason for the original Japanese owners got rid of their cars at auction. The repair bill for a replacement turbo fitted from nissan would cost more than the car is worth over there.

My turbo had a fairly loud whistle when I got it. I highflowed that one before it blew but the stock one I have here is nearly silent. After dissasembly all I could find wrong with my original was the rear bearing was contaminated with dirty burnt oil and exhaust particles. All you can do in this case is increase the oil supply and hope it doesn't fail soon.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109155
Share on other sites

Well I will pick it up from the mechanics soon an apparently the turbo is perfect and everything seems fine so I just have a noisy turbo. Just not used to it being loud after having the quiet turbo in the Subaru.So it now needs a service for new plugs and an injector clean so I'm of to a great start with the car but at least there is nothing major stuffed on it fingers crossed

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112319
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112643
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

I'd also be looking at the O2 sensor.:thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112885
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ironically the GTT was quite reliable in the 7 years of ownership. From memory I've only had to replace a radiator and coilpacks out of inconvenience 
    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
×
×
  • Create New...