Jump to content
SAU Community

Recommended Posts

Symptoms:

1. Fang in 2nd, goes to 4.5-5k rpm then sortof sits there while the speedo goes from 40 to 70 or whatever.

2. Similar in 3rd

3. Engine RPM *sounds* the same, so I don't think it is the RPM gauge with a problem, and the speedo is going up sortof the way it should..

I haven't done any mods, the weather hasn't been any different really. What *has* changed, although the problem started before, is clutch fluid being topped up (leak from master) and HICAS reset (was full of fluid but they forgot to reset, so light stayed on).

Anyone have any ideas? It doesn't seem to 'slip' in 1st though its too fast to tell really. The mechanic I took for a drive and he drove doesn't think it is the clutch, although it didn't happen as badly.

The only thing they suggested was maybe the pressureplate springs were a bit old so maybe in some situations it isn't clamping...?

On the plus side, means I don't have to fork out $1200 for a new one just yet <_<

Link to comment
https://www.sau.com.au/forums/topic/383380-clutch-issue/
Share on other sites

Symptoms:

1. Fang in 2nd, goes to 4.5-5k rpm then sortof sits there while the speedo goes from 40 to 70 or whatever.

2. Similar in 3rd

3. Engine RPM *sounds* the same, so I don't think it is the RPM gauge with a problem, and the speedo is going up sortof the way it should..

I haven't done any mods, the weather hasn't been any different really. What *has* changed, although the problem started before, is clutch fluid being topped up (leak from master) and HICAS reset (was full of fluid but they forgot to reset, so light stayed on).

Anyone have any ideas? It doesn't seem to 'slip' in 1st though its too fast to tell really. The mechanic I took for a drive and he drove doesn't think it is the clutch, although it didn't happen as badly.

The only thing they suggested was maybe the pressureplate springs were a bit old so maybe in some situations it isn't clamping...?

On the plus side, means I don't have to fork out $1200 for a new one just yet <_<

Sounds the opposite to clutch slip, usually clutch slip the revs would shoot up but your speed would remain the same

But yeah put it in 5th at low revs, and hold your foot flat till it starts building boost. Sounds like youve done something similar in 4th anyway. Just saying its a bit weird that the speed shot up but revs remained the same

Link to comment
https://www.sau.com.au/forums/topic/383380-clutch-issue/#findComment-6118539
Share on other sites

OK that's it, it must be slipping. Now in 4th if I give it everything it definitely slips.

Does anyone know if it could just be the pressure plate springs, and how much that would cost if it was?

You need to replace the whole clutch not just part of it

I can get npc clutches cheap. Pm me if keen

Link to comment
https://www.sau.com.au/forums/topic/383380-clutch-issue/#findComment-6119079
Share on other sites

HICAS reset as in yea the light was still on and I think some weird feeling in the car was there, but they reset and now light off and I *think* that made it drive better but hard to tell.

Clutch definitely on its way out, its fun being in 5th on highway planting foot and seeing it go to like 5000rpm LOL.

Link to comment
https://www.sau.com.au/forums/topic/383380-clutch-issue/#findComment-6124118
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...