Jump to content
SAU Community

Recommended Posts

Thx mates =)

Yes, oil and water temp has been a lil bit high. Yes I have the original Nismo oil cooler. The temperature was so high because the not mapping after change from hks to garrett turbo. I also had no big radiator. And much more things... But now I have all better =) And when the car ready it will be mapped from Sky-engineering.

So, the begin of build the engine together =)

IMG-20111126-WA0001.jpg

IMG-20111126-WA0000.jpg

Please klick "I like" in Youtube and support me in a Video Contest, the video with most "I like" klicks in Youtube wins the contest =)

Thanks guys =)

Edited by Skyliensusky

Thx =)

Yes, we have tourist drive, where you dont need a helmet, and we have trackdays, and at some trackdays we also need a helmet.

Yes, this are the standard blow offs.

Only 4 hours until the end of the contest. Every vote counts =)

Thanks guys

So, the contest is over and I won =)

My price, TEIN Coilovers - Type RA from JapanDyno.com, yeahh =)

Thanks so much for all the votes of you. Thats so great!

News with the engine rebuild, slowly the engine looks more and more like a real engine =)

IMG-20111129-WA0004.jpg

IMG-20111129-WA0003.jpg

IMG-20111129-WA0002.jpg

IMG-20111129-WA0005.jpg

IMG-20111129-WA0001.jpg

Good work of High-Import-Performance =)

And I`m thinking about a new color of the engine bay. I want to paint that which is purple in the pic

CIMG31802.jpg

What would you say, how has the engine to look? ;)

Congrats on the win mate thumbsup.gif

Where abouts in Germany are you from?? I'm guessing Frankfurt or Koln area if you're able to get out to the 'Ring so much? I'm originally from Kiefersfelden, so haven't managed to get across to the 'Ring on my visits yet, it's penciled in for next year though! :D

Love the car by the way. The only Jap imports I've seen over there were a M35 Stagea and a 33 GTR, I must be too far out of the way :P How do you go with the salt on the roads, does it cause many problems or do you not drive the R in winter??

@Hanaldo: Hehe, thx bro =) I`m from Leipzig, in the east of Germany. So I have round about 500km to the NürburgRing Nordschleife. I`m round about three times of a year on the Ring. But we have also others tracks in germany =)

I don`t drive the car in winter ;) We have a lot of salt in winter of the streets... So you have to to spend a lil bit in protecting the underside of the car ;)

@benkoau: I have the R33 diffs because of the shorter ratio ;) So I have better accleration but less top speed. But the R33 diffs are also good for ~300km/h enough for the track =)

Some News

1. Here are my new Exedy clutch discs

2011-12-02232355Kopie.jpg

2011-12-02232415Kopie.jpg

2. My tough guy changed the place from the mirrow to the outside of the car^^

2011-12-02204309Kopie.jpg

2011-12-02204322Kopie.jpg

3. A friend took a few parts to paint than for this engine bay look a like

img_0025.jpg

4. I made all free to get to the tank.

2011-12-02232346Kopie.jpg

2011-12-02232236Kopie.jpg

2011-12-02232247Kopie.jpg

2011-12-02232253Kopie.jpg

2011-12-02232258Kopie.jpg

2011-12-02232322Kopie.jpg

2011-12-02233244Kopie.jpg

2011-12-02233634Kopie.jpg

Here is the place where I want to have the swirl pot:

2011-12-03003339Kopie.jpg

2011-12-03003347Kopie.jpg

  • 2 weeks later...

something that has always interested me about the nurburgring - hat is the death toll?

there is no way this form of racing would be allowed in aust, without a helmet (unfortunately)

this track is on my 'to do list' :)

something that has always interested me about the nurburgring - hat is the death toll?

there is no way this form of racing would be allowed in aust, without a helmet (unfortunately)

this track is on my 'to do list' :)

for the most part its not a track, its a public toll road. you pay the toll and you drive your lap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drive beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...