Jump to content
SAU Community

Recommended Posts

well its been way to long but A.I.R is opening the doors for drag racing THIS SATURDAY 26TH, sadly only 1/8 mile for the first few events but its a whole lot better than nothing. gates open at 8am, racing from 9 finishes at 11. Some big names are making the trek over including GAS Motorsport and the Brays. seriously not an event to be missed

http://racingonn.com.au/?page_id=1320

and what screams drag racing but a Canary Yellow VL to get you in the mood

Link to comment
https://www.sau.com.au/forums/topic/383959-drag-racing-back-in-sa-at-air/
Share on other sites

Yep I wil be out there for a look. When it is 1/4 mile early next year I will go run the V35 just to see how slow she really is :)

Maybe you missed Matty's post about this http://www.skylinesaustralia.com/forums/topic/375656-drags-back-at-air/

ill b there from 7am crewwing with the 2 500+kw vl turbos, 1 is white n manual (low boost for this meet on et street radials) the other 1 is yellow, number plate BOOSTO running big power thru a glide... has gone 9.90 b4 with much less power...

hope this rain clears, heard there is going to b around 25-30 thousand out there so get in early....

im keening up something fierce

last time i was at a.i.r i ran my car in a saturday night street meet (and kept lining up against 12sec HQs lol)

asif u wernt pantsing them :nyaanyaa: all noise and no hoof :whistling:

ill b there from 7am crewwing with the 2 500+kw vl turbos, 1 is white n manual (low boost for this meet on et street radials) the other 1 is yellow, number plate BOOSTO running big power thru a glide... has gone 9.90 b4 with much less power...

hope this rain clears, heard there is going to b around 25-30 thousand out there so get in early....

7am.. You're keen! Lol

Was talking to chafe lastnight and he was saying he went for a quick test drive and the car is hooking up mint on the et streets, cant wait!

yeah keen as, keen as to beat the traffic mostly lol

yeah i spoke to him on wed nite, hes loving the et streets, wait til he gets em on the track, there pretty much as good as slicks these days

i didnt know a top fueler was going out, even tho i heard a rumour yest that darren morgan was thinkn of headn over so that makes sense...

im keen to see joe signorellis 2j pro fx car again, been a while since ive been to jambo...

didnt the ba falcon have near 600 rwkw and the gtr i know had 406kwaw... and from wat i saw on the time board there was a couple tenths in it... hardly a smashing

also, it was the first qualifying run for all cars...

were so many surprised packet cars, great day, pity i had to leaver at 530, was running very smoothly

doorslammers going 4.0 - 4.2 at 173 to 176 mph to the 1/8th... crazy

Was an awesome day with some amazing cars ..... 176mph at half track is amazing - makes your bones hum with excitement as they fly past.

Pity I got burnt as hell - at least I am not as burnt as Terbeeke - he is going to be sore tomorrow! Great to catch up with MattR, Whatsisname, MattyT & Jas too!

didnt the ba falcon have near 600 rwkw and the gtr i know had 406kwaw... and from wat i saw on the time board there was a couple tenths in it... hardly a smashing

also, it was the first qualifying run for all cars...

were so many surprised packet cars, great day, pity i had to leaver at 530, was running very smoothly

doorslammers going 4.0 - 4.2 at 173 to 176 mph to the 1/8th... crazy

its std turbo(ported flapper still internal) on that thing pushing 400 at best and shes a fat bitch with 1900+kg inc driver fuel ......400awkw should of destroyed a ba a few tenths is big news in any drag racing circle :domokun:

Edited by JETURBO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...