Jump to content
SAU Community

Recommended Posts

Hey guys,

So since i bought my 34, iv noticed that my headlights are angled too high, and when driving behind someone that is about 10 metres in front of me, it looks like i am blinding them! (and i dont even have HID's yet!)

iv tried playing around with the adjuster near the drivers side, but im pretty sure thats broken.

Iv heard that is a screw near the headlight itself where it can be adjusted, but i cant seem to find it

can anyone help me out with this, and if possible, post up some pictures

thanks!

Link to comment
https://www.sau.com.au/forums/topic/384093-r34-gtt-headlight-issues/
Share on other sites

Have a look in the DIY section, some guy has a tutorial on installing HID's to his R34 headlights, on one of the pic, it shows the little adjustment screw.

i had a look in the DIY, and dont think i found it.

can someone link me to it, or please try help somehow!

  • 1 month later...

i had a look in the DIY, and dont think i found it.

can someone link me to it, or please try help somehow!

did you even try i serched R34 HID and come up with this mate

http://www.skylinesaustralia.com/forums/topic/269525-r34-gtr-xenon-hid-install/page__p__5483102__hl__r34+hid__fromsearch__1#entry5483102

That's the one lol, didn't think it was too hard to find...

Most cars have an adjuster. looks like a little cog that you can lever slowly with a flat blade screw driver. I did a 370z on the weekend only I adjusted them up not down. Park 1 meter away from a white wall, put the lights on and adjust. 10mm of adjustment of the beam on the wall will give you about 5-10m on the ground (most cars vary)

white cog if you look at the bonnet catch look left or right and you will see it just behind the light it may have a screw type bolt going to it for easy adjustment or it wont if not go upto a wall close and turn it you will see wat it does then go back like old mate said befor and adjust it right for you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...