Jump to content
SAU Community

Recommended Posts

  • Replies 5.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

who do you guys use for having a punt on Motorsport in general ?

there are a few places which have basic futures on F1 MotoGP but nothing really comprehensive.

I noticed centrebet have V8SC options but that's it.

What do people use ?

Sky Sport's commentator Anthony Davidson remains in hospital after breaking his back in a high-speed accident at the Le Mans 24 hours.

Taking part in the legendary endurance race in a Toyota TS030 Hybrid, Davidson's car flipped at the entry to Mulsanne Corner when the Ferrari he was lapping turned in on him. The impact sent Davidson careering into the barriers at high speed.

The 33-year-old was taken to the circuit's medical centre and then transferred to the hospital where scans revealed he had broken two vertebrae in the impact.

"I have felt better, that's for sure," Davidson, who will remain in hospital until Wednesday, said in an interview with Toyota Motorsport.

"I am in a bit of pain, in my lumber area, the middle area of my back. That's the only thing that hurts really so I've been lucky.

"Basically I have two broken vertebrae; T11 and T12. The doctors say the average recovery time is three months, but that's an average person not a professional sportsman or athlete.

"That estimate is to get back to an absolutely healed bone; as strong as it was before. It's more like three weeks until the pain subsides and I get my mobility back fully."

Describing the accident, the former F1 driver said: "I was almost completely past the car after the apex of the kink. I passed a Corvette and a Ferrari with the pro driver sticker on. They were fighting each other and I just assumed the Ferrari ahead was part of their group and therefore another pro.

"The car was all the way to the left as you would expect a pro driver to do. It was only when I got right up to the back that I realised it was one of the amateur-stickered cars.

"But I still wasn't alarmed, I still felt it was a completely legitimate move and thought he would stay to the left, which it looked like he was doing. I made the apex of the corner, started to brake and I was almost out of the corner when I felt contact on the left rear.

"Instantly it spun the car, pivoted round to the left, then took off and turned upside down. At that point I felt I was in an aeroplane out of control. I knew how close the barriers were, and travelling at that speed I was going to be there in no time. That part of the crash was pretty petrifying.

"It crashed back down to the ground, I felt an almighty punch up my spine when the car hit back down on four wheels. I still had my eyes closed and my hands off the wheels, in the brace position. Half a second after that I had the forward impact into the barrier."

He added: "I reopened my eyes and realised I was still here, albeit in a bit of pain. I had feeling and could move my feet; everything was working. I know I should stay in the car, especially with back pain, but initially I felt full of panic and claustrophobia, I just had to get out of the car. It was really odd. I banged the door open and clambered out carefully because I knew I was in pain. I had to stretch out and the closest point was the side of the car, then the medics came over."

http://www.planetf1.com/driver/18227/7822310/Davidson-remains-in-hospital

Yeah he seems to have gotten out of it relatively well.

props to him, talented guy, sometimes seems to show the chip on his shoulder a bit to much but it's understandable when you see the level of some of the drivers in F1 watching from the sidelines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...