Jump to content
SAU Community

Recommended Posts

I went pretty hard at winton over the weekend and once I got my car home and drive it I noticed it is only hitting 15psi compared to my normal 18psi.

My first thort was turbo on the way out as there was oil all over that side of the engine bay, but turns out my catch can was full and my drain plug wasn't done up properly.

I did rip out one of my bolts from a flange on the decat pipe and the arse end of my exaust is just hanging on. Is the lack of back pressure enough to make boost drop by 3psi?

I think the spring in my actuator is 15psi, possibly stuffed boost controller?

What lines/hoses can I check that may have come loose?

I havnt had a chance to look over the car properly because of work I will get stuck into it over the weekend.

I will check cooler piping and fins/shaft play aswell just want to cover all bases.

My car is a r32 gtst

Cheers guys - Trent

Link to comment
https://www.sau.com.au/forums/topic/384393-3psi-drop-in-boost/
Share on other sites

Yeah I will go all over that on the weekend cheers, I wound the boost down on my controller and my gauge still reads 15psi, I'm going to check the hoses off the solenoid aswell

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...