Jump to content
SAU Community

Recommended Posts

Nope. But your answer is very random, like you just rolled a dice and it said 'timing'.

You're going I need to fault find and give us more information if you even want a slight guess from anyone here.

You didn't even have the decency to list any mods.

Is he running a t88, rb34 stroker, NOS and twin rear mounted secondary turbos?

Edited by The Mafia
Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137116
Share on other sites

Will do, bsa. Mafia if he had all them mods dont u think i would have told him to get the service done were all the other work was done? Its a stocker with a front mount cooler and full exhaust, happy trolling?

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137121
Share on other sites

Pull the plugs out re gap to .8 or .9 is he running stock boost? Also check all loom plugs are connected properly. If that still don't work check piping for rags most unlikely but never trust some one unless you know they are capable on rb engines they can be sensitive

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137128
Share on other sites

did your mate change ignition coils as a part of his 100kkm service? R34 RB25 Neo coils are known to start dying at just about this milage. And they don't usually cease working completely, they may work okay under very light loads, at idle etc, but start causing missfires under heavier loads, i.e. on boost. It usually feels like soft rev limiter has been hit, it also sounds funny. And vibrates.

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137181
Share on other sites

Even the small mods youve listed can cause issues. Plus, you haven't said why the car was at the mechanical shop, and what the intentions where of the mehanic.

Keep calling me a troll, I'll start calling you an uninformative dickead with an attitude, that expects us to look into a crystal ball and just magically come up with an answer, with very little to almost no information.

When you post an issue on skylines Australia, you post your mods, and the most obvious thing - what was changed before and after the issue.

We can't just guess.

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137183
Share on other sites

Troll, well ye that seems something to look at legion ill let him know, mafia honestly its hard enough trying to get simple answers but u take it to the next level people are hesitating to ask questions coz assholes like u embaress them im not really switched on about this topic hence my questions no need to scream out loud that im uninformed ur an asshole full stop troll

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137397
Share on other sites

Troll, well ye that seems something to look at legion ill let him know, mafia honestly its hard enough trying to get simple answers but u take it to the next level people are hesitating to ask questions coz assholes like u embaress them im not really switched on about this topic hence my questions no need to scream out loud that im uninformed ur an asshole full stop troll

lol you can forget about getting help on this forum with that attitude

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137495
Share on other sites

My second post was perfectly valid. Wasn't smart, I was just making a simple point.

But you want to be an uninformative dickhead and blame your ignorance and arrogance someone else - me.

I wasn't trolling, as I said I was making a point. We need to know what has been done to the car, who, how, when, why, etc or we are just wasting our time guessing.

Anyway I say it again, you're an arrogant uninformative dickhead and gave us scraps to work with and then proceeded to call me a troll when I pointed out your lack of info.

Wanker - eat a dick, and go to ns.com

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137778
Share on other sites

My second post was perfectly valid. Wasn't smart, I was just making a simple point.

But you want to be an uninformative dickhead and blame your ignorance and arrogance someone else - me.

I wasn't trolling, as I said I was making a point. We need to know what has been done to the car, who, how, when, why, etc or we are just wasting our time guessing.

Anyway I say it again, you're an arrogant uninformative dickhead and gave us scraps to work with and then proceeded to call me a troll when I pointed out your lack of info.

Wanker - eat a dick, and go to ns.com

no worse then this forum mate lol

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6138065
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...