Jump to content
SAU Community

Recommended Posts

Hi all

Ok the molds for the sub enclosures are complete so i will now be taking orders

Price per Enclosure will be $200 carpeted in as close as i can get to stock Grey carpet. The enclosures will be supplied without terminals (terminals can be bought for $8), this enclosure is to suit the passenger side

A 50% deposit will be required to confirm the order, PM me for banking details

I would like at least a batch of 5 to cover my inital costs i.e molds and labour, so once 5 orders have been confirmed i will start construction the turnaround will be approx 7 days

The approx thickness of these enclosures is 5-8mm, with a seamless top section and a 16mm mdf base

Will Suit 10" or 12" sub-woofers upto approx 170mm deep

(I personally have fitted a DLS MW12 with ease to my own enclosure)

Post here if you are interested or have any Q's

Here Are a few pictures to see what they look like

post-85092-0-71733000-1323160124_thumb.jpg

post-85092-0-30620200-1323160146_thumb.jpg

Fresh out of the mold with slightly improved curves

(excuse the dust)

post-85092-0-50958900-1323161326_thumb.jpg

post-85092-0-81707900-1323161314_thumb.jpg

Edited by Fgjoh
Link to comment
https://www.sau.com.au/forums/topic/385044-c34-stagea-sub-enclosure-gb/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Hey Mate, Would definitely be keen on one (or two) of these but have a few questions first.

1. Are you able to supply and fit the terminals if the additional $8.00 is paid? Or make it $10 for your troubles.

2. How can you access the Attessa bottle behind the Amplifier on the Drivers side?

3. What does the Passenger Sub box attach to and vise versa for the Drivers side?

Really cool enclosure though mate! Will lay down a deposit once I get paid :)

Cheers

Hey Mate, Would definitely be keen on one (or two) of these but have a few questions first.

1. Are you able to supply and fit the terminals if the additional $8.00 is paid? Or make it $10 for your troubles.

2. How can you access the Attessa bottle behind the Amplifier on the Drivers side?

3. What does the Passenger Sub box attach to and vise versa for the Drivers side?

Really cool enclosure though mate! Will lay down a deposit once I get paid :)

Cheers

At the moment i won't be making a drivers side enclosure until there would be enough interest as it's a very labour intensive process

1. I can fit the terminals no problems($10 all up is fine to install it)

2. The enclosure can be removed quite easily(i dont see you checking the atessa more than once a month)

3. The enclosure uses the stock floor plastic bolts to fasten them down(dogleg brackets are used to do this)

a small metal tag at the top of the box slips underneath the plastic trim to stop it from moving(they are very secure)

Whats your location, and do you know what sort of cost it would be to ship these interstate if required?

I'm in Adelaide

Shipping should be approx $25-$30 to most states as i have sent items of a similar size

cheers,

Pete

Ok 2 enclosures have been completed so far, within the next few days the other 2 should be complete

I'll post some pics of scriblez new enclosure later in the day

Edited by Fgjoh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...