Jump to content
SAU Community

Recommended Posts

I understand that he May be very busy doing the Big Jobs because lets face it that's where the money is.
I was more than happy to wait 3 months for my Item to be made , but when he does not reply to emails or return phone calls for an update

it makes me very angry. I can only assume he does not give a f**k about the smaller jobs even though they have been paid for.


  • Like 1

As far as I can see he has to take on new work to make some money to pay back what he owes.

I'm not saying the situation is OK, but where do you think any owed money is going to materialise from?

I don't see the relevance...whether it was beer and hookers, a boat in the Bahamas or just the rent that month, if you are owed money what matters is how you could get it back. And the best thing people who are owed money can hope is that he gets work in, turns it around, and makes some money to pay them back.

All I can say from my experience is I wish it was that easy!

Duncan I'm under the understanding you too have been in this position with him, surely you can understand the frustration that all these people have. Some people have families, others merely want their parts & cars sorted.

With him avoiding every single person here or simply lying to them - how is anything going to get resolved?

I've been following this thread for a while now, and whilst I understand where you are coming from Duncan, it is quite obvious that he has no real intention of righting his wrongs. The fact that he makes outlandish excuses and doesn't answer/return phone calls, shows that he has no integrity and is hoping that most of you will just give up after a while.

Has anyone here tried to get the relevant authorities involved?

My experiences are endless!

Who am I, isn't relevant!

Obviously your mates with Brad, which is your call. I've read your previous posts about your experience with him, and I'm guessing in your short time you've been brain washed with lies also! About his work, personal issues & work load!

As you can see here, he OWES people! End of story!

This

Frisky do you have a current outstanding issue with ProFab?

My experiences are endless!

Who am I, isn't relevant!

Obviously your mates with Brad, which is your call. I've read your previous posts about your experience with him, and I'm guessing in your short time you've been brain washed with lies also! About his work, personal issues & work load!

As you can see here, he OWES people! End of story!

I have no doubt that there is people here that have issues with Brad, I've read all about it here on this forum.

These people have actually posted their experiences and justify why they are upset with him (and they justify their posts). You on the other hand use 5 of your grand total of 9 posts on SAU to fan the flames.

surely you have better things to do with your life

Personally I don't give a rats what you think!

I'm glad he's done right by you!

I don't have to tell of my experience cause there isn't just one!

I'm not fanning the flames at all, but I think it was time for me to give people some answers!

I know of you, so I'm not worried at all!

What I do with my life is non of your business, plus all I can say is if only you knew!

You obviously only know what you know I can't hold you responsible for that.

But because I won't post my experience you feel the need to lash out?

I have never once said Brads work isn't good, I'm sure it's great. But his work ethics are a disgrace. Perhaps instead of "reeling me in" take a look at the Performace Forums. I'm sure the title reads "Pro Fabrication Lies, Lies, Lie & More Lies".

You obviously only know what you know I can't hold you responsible for that.

But because I won't post my experience you feel the need to lash out?

I have never once said Brads work isn't good, I'm sure it's great. But his work ethics are a disgrace. Perhaps instead of "reeling me in" take a look at the Performace Forums. I'm sure the title reads "Pro Fabrication Lies, Lies, Lie & More Lies".

Mate, you have a hidden agenda, anyone with half a brain can figure out who you are and what you are trying to do.

I'm not lashing out, I'm quite calm actually

Like i said people have business issues with brad, You have personal issues. This is not the place for personal issues

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...