Jump to content
SAU Community

Recommended Posts

A 10" wide wheel at +46 offset will effectively become something like +36 offset once the 4-5 stud adaptors are installed, and will push the wheels out a fair way. It'll be a tight squeeze.

Why don't you look at the thread I pointed you to (it's the topmost sticky thread) to see what wheel sizes and offsets people have managed to fit? It's a huge database for you to study.

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6151657
Share on other sites

Also depends on whether the back of the wheel is flat or has indentations to allow for the excess from the factory wheel studs to go through. Otherwise the adapters will need to be 25-30mm long meaning the wheels would effectively become 18x10 +16! That is crazy to run on the front of a 2wd R33. The back could work but not the fronts IMO. You are talking GT-R wheel specs not GTS/GTS-T wheel specs.

Buy + Sell = Profit

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6151766
Share on other sites

you will not fit the front rims... no way, I barely fitted 9" wide on the front... and the rears will be tight as...

I reckon your wasting your time, let me guess you bought em cause they look cool...

oh wait a sec your on an NA r33... why bother with 10" you'll have to much grip with 7" rims and 215s

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6151820
Share on other sites

hey man, not a hope of fitting them under the front gayrds, with 8 inch +45s and a 5mm spacer my fronts a flush with 235s. but yer check the database uo the top of this thread :)

oh and nice thread input coupe about being a gts your such a hero (thumbs down)...

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152430
Share on other sites

oh and nice thread input coupe about being a gts your such a hero (thumbs down)...

Take a joke buddy. My car can lift the skin off custard, you jelly?

OT: Just sell them man, unless you want some sort of Hellaflush situation going down and the homo police called.

Edited by 045HOW
Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152497
Share on other sites

hey man, not a hope of fitting them under the front gayrds, with 8 inch +45s and a 5mm spacer my fronts a flush with 235s. but yer check the database uo the top of this thread :)

oh and nice thread input coupe about being a gts your such a hero (thumbs down)...

:huh:

I have seen 18x9.5 +30 and similar on the front of an R33 GTS-T before...

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152806
Share on other sites

the op is buying rims cheap, and is asking people if they will fit, do you really think he wants to pay to now make them fit, Im guessing the labour involved will be outside his budget...

10s on the front of an NA r33 +46 with 4to5 stud spacer, yeah they'll fit if you have the money and the time...

these must be an old model wed cause the new ones dont come in +46...

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6152865
Share on other sites

:huh:

I have seen 18x9.5 +30 and similar on the front of an R33 GTS-T before...

18x9.5+30 is nothing for a 33 front guard.

without excess camber i am running 18x9.5+12 with 235's and it's low

it's an easy fit. a few guys are running an inch wider than that too... but you really need to camber them in a fair bit

Link to comment
https://www.sau.com.au/forums/topic/385671-weds-on-a-r33/#findComment-6153965
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...