Jump to content
SAU Community

Slicks

GOT BOOST

By GOT BOOST,
in Western Australia

 Share

Recommended Posts

JUDGED Community Regular

JUDGED

Posted
Posted

Yo GOT BOOST, :headspin:

Watched your runs and they were mad. It looked like you were going great after the first 11.7 run. Gald we left when we did as the track got even more slippery as it started to rain. That last run of 11.5 was outstanding well done.

As you could see from my times the NEW ECU is on song and now for some dyno time and Nitto's then back to the track for some PB times.

I did a 13.4 untuned ECU (thanks Fane for the yahoo's), but what was important was the terminal speed of 108mph/175kph that has me the most excited. So back to the track. hope everyone gets down and has a run.

Paully are you going to have a run next week????

GTRRRR, great run dude nice 12.5 , shame you are selling the car and the drift damage sux.

FANE, thanks for the support, get your car there next week. :)

Link to comment
https://www.sau.com.au/forums/topic/38585-slicks/#findComment-783826
Share on other sites
rev210 Grand Master

rev210

Posted
Posted

sean,

I don't know if you already do this but, if you wait till the last couple of orange lights with the clutch pushed in , when in gear, and mash the go pedal in one hit and as the revs jump to 7000 sidestep the clutch. This works a little better than holding the rev limiter because you get a smallish amount of boost built as the engine experiences light load from accellerating itself. Next step antilag ? :)

Link to comment
https://www.sau.com.au/forums/topic/38585-slicks/#findComment-785765
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...