Jump to content
SAU Community

Recommended Posts

Hi guys;

I was going through a traffic light at the normal speed limit and a car came flying past me from behind and the camera flashed! he was probably doing 80 in a 60 zone - Pretty sure we were right next to each other when the flash happened so my question is, I wouldn't be pinged by that fine would I? How do the camera's know which car was over the limit?

Link to comment
https://www.sau.com.au/forums/topic/386219-speed-camera-question/
Share on other sites

Hi guys;

I was going through a traffic light at the normal speed limit and a car came flying past me from behind and the camera flashed! he was probably doing 80 in a 60 zone - Pretty sure we were right next to each other when the flash happened so my question is, I wouldn't be pinged by that fine would I? How do the camera's know which car was over the limit?

the exact same thing happened to me and i didn't get a fine that was 6-7 months ago now so wouldn't sweat ,not sure about how it pick which cars which

They know which lane triggered.

You won't get a fine. They most certainly will send out if more than one car is in the pic.

I mean take the cameras on Hoddle St, Dandenong Rd etc - Traffic 24x7 and the cameras go off like Christmas lights!

As above, sensor information is included with photo and if you request the photo it will actually mark in which lane you were speeding. Two pics are taken at intersection cameras and these show which car was going faster.

You should not worry - you were doing the right thing...their technology should differentiate accordingly but even if it fails to - just spend 10 minutes wring them a letter to contest the fine and you will definitely be in the clear - wait 1 month or so and you should know...don't worry...

They know which lane triggered.

You won't get a fine. They most certainly will send out if more than one car is in the pic.

I mean take the cameras on Hoddle St, Dandenong Rd etc - Traffic 24x7 and the cameras go off like Christmas lights!

this is true, however those camera's on hoddle are pretty much always faulty :rolleyes:

Since we are on the topic of speed/red light cameras and hoddle st... I see it happen alot where people get in the right lane to turn right, sitting on the sensor and then go f"k it, i'll go straight, get off the sensor and the camera obviously takes a shot as it thinks they are turning on a red... is what they are doing legal? or are you obliged to turn right?

differing opinions? seems like everyone is in agreement... nothing to worry about

Paranoid OP hear's what paranoid OP wants to hear :)

Since we are on the topic of speed/red light cameras and hoddle st... I see it happen alot where people get in the right lane to turn right, sitting on the sensor and then go f"k it, i'll go straight, get off the sensor and the camera obviously takes a shot as it thinks they are turning on a red... is what they are doing legal? or are you obliged to turn right?

I think it's technically illegal to do that, because you're changing directions at an intersection and you almost always have to cross over a solid line to do this manouvre. But I don't think you'd get a camera fine for it if the camera went off. Reason being, is that red light cameras must take two photos for you to receive a fine: one at the first sensor when you cross the pedestrian lines into the intersection, and a second photo upon crossing the sensor at the middle/end of the intersection. The assumption is that people who willingly travel through the red will cross over both sensors, whilst those wanting to stop short of it and not completely cross the intersection will only get snapped once - behaviour they obviously want to promote. Saw a friend driving and put on their brakes in the wet once...they were carrying a heavy load and their tyres weren't fantastic, so they skidded to a stop in the middle of the intersection. Camera went off once, but no fine ever came of it.

Since we are on the topic of speed/red light cameras and hoddle st... I see it happen alot where people get in the right lane to turn right, sitting on the sensor and then go f"k it, i'll go straight, get off the sensor and the camera obviously takes a shot as it thinks they are turning on a red... is what they are doing legal? or are you obliged to turn right?

did it once, camera went off... no fine :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not too sure just yet, want to have a go at doing what I can myself, but to start with want someone to cast their eye over it tell me what needs doing to get it running and back on the road, so anyone with great overall knowledge would be ideal.
    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
    • Steam valve seals are usually responsible for cold start smoke, it goes away once engine warmed up. Disconnect it let engine breathers and let it breath freely, see if problem goes away after a short drive. Also check to make sure engine oil drain pipe is not blocked or kinked. 
    • Haha thanks! Yea I'm moving over from 2x 1000cc jets pre throttle over to 6x 190cc direct port jets and 1x 500cc pre throttle jet.  Direct port comes with all the advantages you would expect, except that pre throttle does cool down IAT'S more. That's why my direct port nozzle placement is closest to the plenum as possible in the runners to allow the air more time to cool before being sucked in. I'm also putting that one 500cc pre throttle jet to help with more cooling. It's a hybrid system. There's a lot more advantages to moving over to a PWM solenoid with a constant pressure system vs my old PWM pump setup, but I'll get more into that once I'm done converting everything over. The ricer in me is excited to see SS tubing all over my manifold though!
×
×
  • Create New...