Jump to content
SAU Community

Recommended Posts

Gearbox in. R32 auto Tailshaft getting chopped up and R33 yoke fitted. Opted to go with the 2 piece as I've heard nothing but dramas from 1 piece setups. Started mucking around with the intake pipework setup, decided that a blow off was too much bother.. ahh the joy of MAP tuning.

Getting close to the great wire up, OEM coilpacks are now only AUD330 delivered and for the loom, you can just buy the plugs if you are going aftermarket loom for your ECU!

Having a few dramas with the power steering setup, seems like every RB has a different orientation of the pump depending on AWD, HICAS and model. Getting the combination wrong means either the pump doesn't fit or it is positioned to far back or forwards for the drive belt. Going to try a 26 bracket with 25 non-hicas pump, fingers crossed.

Also learnt that the heater core piping is much smaller diameter between each model, thus, you will need the water fitting from an RB20 to fit up the heater setup without mucking around. This is tricky to get off and requires a 27mm deep socket to get off easily. Be warned, it is very easy to round the fitting with a spanner even with the engine out of the car.

In any case, feeling the progress now, mostly because ACE workshop is doing such awesome work :).

  • 2 weeks later...

Didn't even know they were an option to be honest. They don't look *that* much cheaper for the extra work but given that I already have a set of OEMs I guess i'll keep it in mind if any fail me.

Still arguing with powersteering. Trying a Neo bracket and pump now because all the 20/26/25 combinations we tried didn't work.

  • 3 weeks later...

Just a little update.

The race between my first born and this car is currently neck and neck, however, I think sportsbet has odds on baby to win :(.

The trust waste gate which wouldn't hold pressure. Ace Workshop pulled it apart and found a leaking rubber diaphragm and some horribly shoddy workmanship by a former owner.

Trust Wastegate Before

After some tender love and care it now looks like this:

Trust Wastegate After

I had the wonderful task of picking apart the RB20 loom for the wiper controls.

Before

RB20 Loom before

After

RB20 Loom after

I did manage to source a Neo powersteering pump after several false starts and it all bolted in without issue and lined up beautifully (except for being slightly bent, le sigh).

Most of the ancillaries are now connected with just a couple of bits and pieces to tidy up. After the intake is finalised, it's finally time to get wiring.

The engine bay currently looks like this:

Progress at 25/08/2014

Edited by Sarumatix
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...