Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Will be late Jan or very early Feb, I'm back down to tas on the 5th of Feb and the stagea is now up for sale

Probably will be in the next 2 weeks so watch this space for datails!

somewhere between using bad fuel once and my turbo failied andinstalling a hypergear/walbro/450cc injectors, nistune and taking too long to get booked in at a tuner, them delaying it an extra week because they couldnt get my front shaft out (they charged me an hours labour to not get it out)(took me 10 mins and i dont even have a jack), it was tuned st 306hp, 20 psi at 4000rpm dropping to 14psi at 7000rpm. on the way home from the tune i had a strange noise (i now think it was audible knock) and repeated check engine lights so pulled over about 10 mins after picking it, (pulled over as soon as the light came on) rang the tuner and he never returned my call. it never ran properly after that, did a compression test after trying all sorts of tests and came back at 96 167 167 167 167 167, tipped in some oil and came up to 130, i found 4 big problems once i had it apart, broken engine mount, cracked piston, valve about to drop, headgasket borderline blown, so yeah been a few months driving my mums camry.

Ok, got my car back (albeit with my optima battery completely f$%#@*d, and damn battery world not honoring the warranty.... So, should get a new batt today... I am still tentatively in, but my car will be going into the panel shop very soon to (finally after 3 years) get the roof rail replacement kit fitted!

I'll keep an eye on the dates, and try to make sure I have the Stag on the road for this meet... :)

Someone will have to take over this one for me, I'm heading to the uk tmrw for a funeral

Then I'm off to tassie 5 days after I return

Hopefully someone can take over and finish this so you guys get a meet out of it

Cheers, tom

Sorry to hear the bad news Tom.

I'll run a few ideas up the flagpole & see who salutes.

So everyone, either the weekend of 21/22 or 28/29. Can a few people vote for a day?

I would prefer a Saturday, but traditionally these things are held on a Sunday due to work/sport comittments etc, so maybe the first few in agreement can set the date & the rest of us will have go with it. In any case there's no way everyone will be able to make it no matter what date is set.

I've got a few ideas for the route but would appreciate someone reminding me of the usual GC meet point/s.

Cheers, Leon.

What's a guy got to do to generate some interest? Free drinks at lunch?

OK, Sunday 22nd of January, yes, just over a week away (unless a significant number of people actually speak up for a different date).

Route TBC.

sounds pretty good to me. Usual meet spot I we use is Coomera BP, but depends on where you want to go.... Mudgeeraba Shell is another good spot (and it's only 2 min from my place!!)

The route for Sunday is the reverse of a cruise from 2009. I'll post a route map in the next day or so, but essentially it is this:

South down Pacific Motorway with pickups along the way, Locations & times to be confirmed.

Exit around Elanora & head up Tomewin Mountain Rd

Over the top of the mountain & down into Murwillumbah.

Out thru Crystal Creek & up past Natural bridge & Numinbah Valley.

Back onto the motorway again at Nerang & head for home (or lunch?).

We'll have some stops along the way, so if you have any suggestions/locations for lunch please let us know.

Thanks to Micah for his input & especially for confirming the roads are OK to drive on as of a few weeks ago.

Looks like the usual apologies are coming in thick & fast, lol. Happens every cruise.

Hey Josh, I hope you can make it as I don't want to be the only M35 there.

For everyone else, it doesn't matter if your Stag is clean or dirty, modified or standard, straight or dinged - I'd like to encourage everyone to take a few hours to meet up & have a drive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...