Jump to content
SAU Community

Recommended Posts

Hey everyone im pretty new to SAU forum and would just like to say hey for starters :D

Just got my first skyline !! WOOT

I have had it for about 3 months now , i have been into them for agez and is a dream come true to finally own one xD

I however unfortunately yet am not the go to guru about the car and still learning about it ' mechanically' which has been fun.

I have come here to ask the question and hopefully get some good responses towards my skyline and any constructive comments are

more the appreciated =D

I have had a few friends and a few random skyline owners i have come across in my travels have a look at my car and i haven't really got a set

answer as to; What series my skyline actually is ?

Helping me out with this will help me better understand my car and i wont be going to buy S2 parts instead of needing S1, visa versa teehee.gif

Also any cool upgrades you think would go nice with this car please let us know

Cheers Guys!

Ps: One of the lights says S2, but i think it may because of a replaced headlight..

Photos attached. thanks.gif

post-89794-0-44764400-1325140544_thumb.jpg

post-89794-0-54317800-1325141610_thumb.jpg

post-89794-0-33442800-1325141658_thumb.jpg

post-89794-0-96886500-1325141732_thumb.jpg

post-89794-0-81822000-1325143382_thumb.jpg

post-89794-0-50620500-1325143419_thumb.jpg

post-89794-0-69595200-1325143469_thumb.jpg

post-89794-0-15377800-1325143522_thumb.jpg

post-89794-0-25595900-1325143560_thumb.jpg

post-89794-0-11634000-1325143592_thumb.jpg

post-89794-0-68190300-1325143630_thumb.jpg

Edited by 2ToneSkyline

I see thankyou, well apparently mine is 1995

What fits on 1.5 ? mainly S1 things or does 1.5 have its own type of bodys etc?

Im looking at buying someones S1 front body this weekend would like to know if its gonna fit :)

S2 front end, S2 engine, S1.5/S2 steering wheel, S1 interior, S1 wing, S1 rear gander. Bit of a tough one, but being a 1995 model it's definately a S1.5.

^WHS

But S2 comes with a different S/wheel.

And yeah, imo keep the S2 front end and get a S2 spoiler thumbsup.gif

Edited by 10 4

Definitely Series 1.5 with S2 front conversion and for some retarded f**ked reason a S1 wing lol

Fronts bars are all interchangeable, just not grills and bonnets due to the difference in headlights.

LOL, didnt look at plates, sorry.

You guys should have a "PAY IT FORWARD" section over there like we do in the SAUNSW members section, we use it for parts that are gathering dust in the bowls of our garages and sheds, you put all your spares up for free but you get to pick other parts which you get for free, old school swap meet style.

Someone give this man a S2 wing.

Front bar is NOT exactly interchange, the lower edge of the series 2 headlights sits back further than the series 1 lights so the top edge of the bumper is also different. With that said they will swap over and look ok from a distance but it won't be right. Just stick with the series 2 front.

Also for other folks looking to identify an R33 its actually quite simple, just check the chassis number:

ECR33-0xxxxx = series 1

ECR33-05xxxx = series 1.5

ECR33-1xxxxx = series 2

The same basic rules applies for many Nissan models.

Edited by kakimoto33

oh awesome :D thankyou i shall check that soon

yeah unfortunatly my front bar is cracked to far when i bought it i can see the cops just hounding me, i just got a s1 front bar for a sweet deal :)

ill let you guys know how it goes and post a pic of it

cheers

  • 2 weeks later...

Hey everyone im pretty new to SAU forum and would just like to say hey for starters :D

Just got my first skyline !! WOOT

I have had it for about 3 months now , i have been into them for agez and is a dream come true to finally own one xD

I however unfortunately yet am not the go to guru about the car and still learning about it ' mechanically' which has been fun.

I have come here to ask the question and hopefully get some good responses towards my skyline and any constructive comments are

more the appreciated =D

I have had a few friends and a few random skyline owners i have come across in my travels have a look at my car and i haven't really got a set

answer as to; What series my skyline actually is ?

Helping me out with this will help me better understand my car and i wont be going to buy S2 parts instead of needing S1, visa versa teehee.gif

Also any cool upgrades you think would go nice with this car please let us know

Cheers Guys!

Ps: One of the lights says S2, but i think it may because of a replaced headlight..

Photos attached. thanks.gif

depending on whats been done already, some really basic upgrades that i have done to my 33 are very simple ones, installed a boost tee and boost gauge, uped the boost to 9PSI (will be going to 10-12 in probably the next day or so), plus a CAI system, i did these upgrades only as the previous owner had already installed a 3"exhaust from turbo back and a FMIC (had a monsta brand, swapped it out with a saber one i had lying around) and from my understanding, these little upgrades can produce from my understanding about 20 RWKW (correct me if i'm wrong)

depending on whats been done already, some really basic upgrades that i have done to my 33 are very simple ones, installed a boost tee and boost gauge, uped the boost to 9PSI (will be going to 10-12 in probably the next day or so), plus a CAI system, i did these upgrades only as the previous owner had already installed a 3"exhaust from turbo back and a FMIC (had a monsta brand, swapped it out with a saber one i had lying around) and from my understanding, these little upgrades can produce from my understanding about 20 RWKW (correct me if i'm wrong)

Should save up for an electronic boost controller. Boost Ts will eventually f**k out but before that happens they have the potential to boost spike and overboost your engine AFAIK.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...