Jump to content
SAU Community

R32 Upgrade Nistune And Other Parts

just_racing
 Share

Recommended Posts

just_racing Collaborator

just_racing

Posted
Posted

Put a hole through a piston on my RB20 so I have upgraded for my next build. I have some good budget parts to get your RB20 going harder.

I am negotiable and will do a good price if you want to bundle it up for a package deal.

R32 GTST ECU with Nistune fitted. Looking for $600. Was fitted March 2011 and has done only 3 or 4 track days.

post-40739-0-52096900-1325497287_thumb.jpg

6 x RB26 injectors. $200. Bought them off another member but never fitted them myself. I was told they were working when they came out. You will need to add a resistor pack to use these in the RB20 but there is a whole thread on how to do this.

post-40739-0-42458500-1325497743_thumb.jpg

Z32 AFM without cable. Has one of the bolt holes broken for the mounting of the filter but shouldn't be too hard to make a braket to support it. These go for $150 second hand so $75 with the broken part.

post-40739-0-13015000-1325498226_thumb.jpgpost-40739-0-15655700-1325498283_thumb.jpg

Walbro fuel pump GSS342 255lph. $80 Fitted with Nistune in March and has done the same 3 or 4 track days.

post-40739-0-54764000-1325498782_thumb.jpg

RB26 fuel pump A42-T44. $80.

post-40739-0-76630200-1325499147_thumb.jpg

R32 GTST fuel tank with filler, straps,sender and original pump if I can find it. $50. Gone to fuel cell. No picture at the moment but I am sure you can figure out what it looks like!

All parts are in Hemmant, Brisbane. Willing to post anything other than the fuel tank at cost.

Best to call or text 0414 236 724 but I will try to keep an eye on the thread as much as possible.

Link to comment
https://www.sau.com.au/forums/topic/387061-r32-upgrade-nistune-and-other-parts/
Share on other sites
just_racing Collaborator

just_racing

Posted
  • Author
Posted

What condition is the inside of the tank?

Sorry I missed your question.I think the tank is fine. I was usig it up to just recently and no fuel issues.

All other parts still for sale!!

just_racing Collaborator

just_racing

Posted
  • Author
Posted

ECU sold. All other parts are available. Taking offers.Want it all gone.

Put a hole through a piston on my RB20 so I have upgraded for my next build. I have some good budget parts to get your RB20 going harder.

I am negotiable and will do a good price if you want to bundle it up for a package deal.

R32 GTST ECU with Nistune fitted. Looking for $600. Was fitted March 2011 and has done only 3 or 4 track days.

post-40739-0-52096900-1325497287_thumb.jpg

6 x RB26 injectors. $200. Bought them off another member but never fitted them myself. I was told they were working when they came out. You will need to add a resistor pack to use these in the RB20 but there is a whole thread on how to do this.

post-40739-0-42458500-1325497743_thumb.jpg

Z32 AFM without cable. Has one of the bolt holes broken for the mounting of the filter but shouldn't be too hard to make a braket to support it. These go for $150 second hand so $75 with the broken part.

post-40739-0-13015000-1325498226_thumb.jpgpost-40739-0-15655700-1325498283_thumb.jpg

Walbro fuel pump GSS342 255lph. $80 Fitted with Nistune in March and has done the same 3 or 4 track days.

post-40739-0-54764000-1325498782_thumb.jpg

RB26 fuel pump A42-T44. $80.

post-40739-0-76630200-1325499147_thumb.jpg

R32 GTST fuel tank with filler, straps,sender and original pump if I can find it. $50. Gone to fuel cell. No picture at the moment but I am sure you can figure out what it looks like!

All parts are in Hemmant, Brisbane. Willing to post anything other than the fuel tank at cost.

Best to call or text 0414 236 724 but I will try to keep an eye on the thread as much as possible.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...