Jump to content
SAU Community

R32 Upgrade Nistune And Other Parts

just_racing
 Share

Recommended Posts

just_racing Collaborator

just_racing

Posted
Posted

Put a hole through a piston on my RB20 so I have upgraded for my next build. I have some good budget parts to get your RB20 going harder.

I am negotiable and will do a good price if you want to bundle it up for a package deal.

R32 GTST ECU with Nistune fitted. Looking for $600. Was fitted March 2011 and has done only 3 or 4 track days.

post-40739-0-52096900-1325497287_thumb.jpg

6 x RB26 injectors. $200. Bought them off another member but never fitted them myself. I was told they were working when they came out. You will need to add a resistor pack to use these in the RB20 but there is a whole thread on how to do this.

post-40739-0-42458500-1325497743_thumb.jpg

Z32 AFM without cable. Has one of the bolt holes broken for the mounting of the filter but shouldn't be too hard to make a braket to support it. These go for $150 second hand so $75 with the broken part.

post-40739-0-13015000-1325498226_thumb.jpgpost-40739-0-15655700-1325498283_thumb.jpg

Walbro fuel pump GSS342 255lph. $80 Fitted with Nistune in March and has done the same 3 or 4 track days.

post-40739-0-54764000-1325498782_thumb.jpg

RB26 fuel pump A42-T44. $80.

post-40739-0-76630200-1325499147_thumb.jpg

R32 GTST fuel tank with filler, straps,sender and original pump if I can find it. $50. Gone to fuel cell. No picture at the moment but I am sure you can figure out what it looks like!

All parts are in Hemmant, Brisbane. Willing to post anything other than the fuel tank at cost.

Best to call or text 0414 236 724 but I will try to keep an eye on the thread as much as possible.

Link to comment
https://www.sau.com.au/forums/topic/387061-r32-upgrade-nistune-and-other-parts/
Share on other sites
just_racing Collaborator

just_racing

Posted
  • Author
Posted

What condition is the inside of the tank?

Sorry I missed your question.I think the tank is fine. I was usig it up to just recently and no fuel issues.

All other parts still for sale!!

just_racing Collaborator

just_racing

Posted
  • Author
Posted

ECU sold. All other parts are available. Taking offers.Want it all gone.

Put a hole through a piston on my RB20 so I have upgraded for my next build. I have some good budget parts to get your RB20 going harder.

I am negotiable and will do a good price if you want to bundle it up for a package deal.

R32 GTST ECU with Nistune fitted. Looking for $600. Was fitted March 2011 and has done only 3 or 4 track days.

post-40739-0-52096900-1325497287_thumb.jpg

6 x RB26 injectors. $200. Bought them off another member but never fitted them myself. I was told they were working when they came out. You will need to add a resistor pack to use these in the RB20 but there is a whole thread on how to do this.

post-40739-0-42458500-1325497743_thumb.jpg

Z32 AFM without cable. Has one of the bolt holes broken for the mounting of the filter but shouldn't be too hard to make a braket to support it. These go for $150 second hand so $75 with the broken part.

post-40739-0-13015000-1325498226_thumb.jpgpost-40739-0-15655700-1325498283_thumb.jpg

Walbro fuel pump GSS342 255lph. $80 Fitted with Nistune in March and has done the same 3 or 4 track days.

post-40739-0-54764000-1325498782_thumb.jpg

RB26 fuel pump A42-T44. $80.

post-40739-0-76630200-1325499147_thumb.jpg

R32 GTST fuel tank with filler, straps,sender and original pump if I can find it. $50. Gone to fuel cell. No picture at the moment but I am sure you can figure out what it looks like!

All parts are in Hemmant, Brisbane. Willing to post anything other than the fuel tank at cost.

Best to call or text 0414 236 724 but I will try to keep an eye on the thread as much as possible.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...