Jump to content
SAU Community

Recommended Posts

Hey guys,

Looking at buying another car which is a bit more street friendly but one that can also tow my r33 when I take it to the track.

I've been looking up stageas because there are some sub 10k which is in my price range..

Obviously id put a trans cooler and other bits and pieces to aid in towing but I'm looking at any first hand experiences in towing cars with one...

Thank for any input

Link to comment
https://www.sau.com.au/forums/topic/387208-towing-a-car-with-a-stagea/
Share on other sites

Sydney Kid is the one to look up. He tows his track car with a Stag, or did? Getting a towbar can be a pain. Actually found a Patrol the best option. That is used to tow the Sil

I used my stag to tow a car trailer on the odd occasion, and it towed my boat a fair bit. I didn't really like it. Not enough power so it kept changing gears every 2 secs up hill.

That's partly the reason I sold it, it can tow of required, but as a dedicated tow car, I'd look elsewhere.

It was a series 2 auto(neo motor) It had 3" turbo back exhaust, pod and 12psi, shift kit and sway bars.

It's more that it lacked torque, ie on boost up hills, all good

Off boost, slight rise in the road, gutless, down change a gear :(

I found that unless I was towing on the flat above 100k I'd just hold it in 3rd gear

The rear end felt fair average with the boat on it. Not ver heavy, ie 950kg on the trailer with spare fuel and ski gear, but the long ass trailer made the back end feel like poo

I've towed a few times with mine (rs4s), my only complaint is my excedy heavy duty slipped when accelerating ocassionally up hills. But I would deffinately recommend a brake upgrade just as a safety concern. Emergency stops are not possible. But my previous tow cars have been a 2002 Camry, 1976 corona, 97 surf, 89 falcon, 2000 hilux 2wd. The stagea towed better then those.

Just for information my mods were as follows. 3inch exhaust, front mount, k&n panel filter, split fire coils and the clutch.

as mentioned above, getting a towbar can be a pain. there is a guy in canberra who made one up rated by him to 2.0 tonne. don't confuse this with being engineered to 2.0 tonne you have to get it engineered urself to make it completely legal. however do your research as i bought one of these on recommendation of many SAU members and found it didn't allign at all with the back of my car. The installer up here did tell me though that once they got my rear bumper off there is evidence that my car has been in a accident (which i didn't know when i bought it) and was also told same thing by the tyre shop when they tried to do an allignment, so now i'm out $800 odd for a towbar that won't work on my car. So by research i mean no rear damage repaired or otherwise to the stagea you buy. Also alot of places won't fit second hand towbars, or ones that are made by someone else, or be willing to design one for you.

I tow a fair bit with my stagea and other than terrible fuel economy it is excellent.

All I had to change to make it tow well was:

Much harder and higher rear shocks

Big brakes

Big wheels to clear the big brakes

Rb30 with 25 head

High mount turbo

Front mount intercooler and forward facing plenum

PowerFC

GTR injector conversion

2t tow bar from Max in canberra (mine fit the chassis but required heaps of work trimming the dayz kit)

Also did a manual conversion but I don't think that helped it's towing ability, it is a bit of a pain to pull away from standing starts.

So....for irregular towing I would say go for it....but for regular towing of big loads a lot of work and money is required to work well.

Having said all that, I am very happy with how the car ended up. It is a daily car with occasional (1-2/month) towing of large loads (up to 2.5 tonnes) over long distances. When towing it is dead steady, brakes are great and plenty of power whenever it is needed. The only issue is the fuel economy is terrible when towing.

2t tow bar from Max in canberra (mine fit the chassis but required heaps of work trimming the dayz kit)

i have a mate that works in the industry that deals with hayman reese at good prices inc supply and fit, im sorting out a group buy for the WA boys atm.

Yep, just like my new ride

1989 chev silverado

350 chev, injected, auto, 1500kg in the tray, up to 3000kg on the tow bar.

Doesn't turn, doesn't stop, and it doesn't go fast, but it tows!

  • 3 weeks later...

Anyone have any experience towing with an M35 Stagea by any chance?

Ive been advised that you would (of course) have to get one custom made for the M35, but anyone know where to start in VIC? or is any have been made up in other states?

I am only looking at a tow weight of possibly 1.5-1.6 Tonne max, just a stripped out z20 drifter + trailer, so might not even be that heavy in total

Cheers

Ken

ive researched it to be something like 1.6 tonne safely? (according to wiki and car sales :P)

any chance you'd roughly know how much it would set someone back to get a custom one made up dirtyRS4?

even if its for a c34 id at least know a rough price range :P

cheers

Ken

  • 7 months later...

Not sure if your stil looking at this but these guys do them http://www.wynnumtowbars.com.au/Wynnum/Towbars.html but there in Qld... Im considering getting one done for a boat weighing 500kg gross payload.... Surely got to be better than trying to tow with the Mrs corolla...

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...