Jump to content
SAU Community

Tv Coverage For Sau Vic Tri Club Drag Challenge


Recommended Posts

Massive news!!! Channel 31 Automotive Program " MY DRIVE" is going to do a feature on our Tri Club Drag Day.

Presenter Adam Tonkin is keen to cover all the action of the day!

Including footage of the Cruise there, the Racing, the Show n Shine and interviews with some of the owners of the cars, so get on board, clean those cars, enter the drags or the Show N Shine or just make sure you get your name down to spectate.

This will be a huge day.

Below are the links to My Drive, jump on Facebook click on 'like' and support this great show.

Website : http://www.mydrivemedia.com.au

Facebook : https://www.facebook.com/pages/My-Drive/179002238779472

Go check out the members thread with more details!!!!!

Link - http://www.skylinesaustralia.com/forums/topic/383927-tri-club-drag-challenge-sun-feb-12th-2012/page__pid__6183835__st__20#entry6183835

Maybe if I had enough info that would make me interested enough to want to go it would be, but all I know is there is an event some where doing some thing and channel 31 will be there, not enough to get me interested.

When i find something that interests me i will join, but whrn you have to go through a heap of bullshit just to get info on a single event and there is no other info on any event for the year let alone the next couple of months why would i bother?

It's the 22nd of January, people are on holidays.

Motorsport dates were only sent out from other clubs that we work around in very late Dec/Early Jan. Until they come out the overall calendar cannot be done etc.

If you don't like it - that's fine. Don't need to broken record about it.

If you don't like it - that's fine. Don't need to broken record about it.

Broken record about it? Care to point out where in this thread someone has mentioned that dates and details have not been finalised yet for 2012 so there is no other information available?

Thats all that needed to be said, instead the general consensus is to just pay the money to find out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...