Jump to content
SAU Community

Recommended Posts

just gunna leave this here .........na 6 banger vs 32 turbo sorry lol, good on trav for getting it down the 1/8th at tailem bend on the weekend ....anyone own the 32?

http://s219.photobucket.com/albums/cc22/traveb6/?action=view&current=19022012132.mp4

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Hi Martin, when are we going to see the willall stable come out to play?, surely Mr Wilson is getting itchy to play.

We may bring the 35 out at some stage when its full track just to 'see'. RH9 is retired from drag racing though. Its not coming back out.

Dont let my lack of enthusiasm stop you though! It looks like a doddle to run a fairly stock R32/R33 GTR into the 10s these days, and if you put the right tyre under it a GTS-t shouldnt be much further behind. Plenty of folks in manual Commodores pumping in the 10s with dyno cards in the mid 300s, so the superior rear end of the Nissan puts it well within reach.

When it comes to drag racing your average street performance car there's almost no comparison between a 200 odd kW AWD Evo X with slick auto transmission and a 250-300+ RWD Skyline, particular if the Skyline is a 5 speed manual.

Read what I wrote again - its all in the 60. That has - always been the way.

Dyno numbers mean very little on street cars on the drag strip, particularly when most of the turbo Falcons getting around with 400+rwkw are really only spinning 330 or so :pirate:

yeh he put the 3.23 diff gears in did a 1.6 60 ft thats moving for a barge 7.40 and a 98mph for a half track is doing well runnin a 380 on the disney about the money for 98mph half track :happy: going a pulley and going to be the first to push the non cooled situation and around the mid year with low temps i reckn he will bag it, gotta love power vs $$$ mind u why do we bother being tight :teehee: lol

was reading an old article u did in boost mag and it was on anti lag system simon had made up from morpowa on his [no gas] beast how much of an effect is to be had in an anti lag system in any car's 60ft , i know its a bit off topic but in the drag related section, and dammmm simon looks young lol :laugh:

yeh i know its old tech how far did it ever elvolve to .....a point where a manual could be used for boost off the line in a good way or just damaging to everything in the drive line?

awd is for homo's that can't power skid point and steer is a bit boring unless theres a on off control via flick of the trac control button ? got that figured out on the 35 yet it would be nice

what options are there for the skyline for boost off the line in manual form?

Read what I wrote again - its all in the 60. That has - always been the way.

Dyno numbers mean very little on street cars on the drag strip, particularly when most of the turbo Falcons getting around with 400+rwkw are really only spinning 330 or so :pirate:

That was my whole point; AWD and idiot proof launch capability. If you've got the grunt to run 11.9 the SST Evo X will do it, even with your Granny behind the wheel. Put dear old Gran in the powerful RWD and unless she is related to the Bray family she's got buckleys of achieving 11.9.

yeh i know its old tech how far did it ever elvolve to .....a point where a manual could be used for boost off the line in a good way or just damaging to everything in the drive line?

All the AWD cars that you see us race will make boost on the line via various launch control subroutines in the ECU. My STi will hang around 1.0 bar stationary if requested, while RH9 could go well beyond that if need be.

Because these cars grip and go - rather than flail around axle tramping - its uncommon to damage anything.

This is all pointless in Commodore/Falcon turbo as in manual form their rear end geometry is that poor stopping them from axle tramping and twisting, snapping, bending everything in the driveline is almost impossible.

That was my whole point; AWD and idiot proof launch capability. If you've got the grunt to run 11.9 the SST Evo X will do it, even with your Granny behind the wheel. Put dear old Gran in the powerful RWD and unless she is related to the Bray family she's got buckleys of achieving 11.9.

Having driven a manual RWD into an 11 and an SST into an 11, I can tell you the kind of timing and driving input required to get either job done isnt that different. Obviously some of us have more talented Nannys than others.

All the AWD cars that you see us race will make boost on the line via various launch control subroutines in the ECU. My STi will hang around 1.0 bar stationary if requested, while RH9 could go well beyond that if need be.

Because these cars grip and go - rather than flail around axle tramping - its uncommon to damage anything.

This is all pointless in Commodore/Falcon turbo as in manual form their rear end geometry is that poor stopping them from axle tramping and twisting, snapping, bending everything in the driveline is almost impossible.

i think this is the most valid point cheap cars just arent set up for that kind of abuse where as the decent dollar euro/jap/germany built cars handle the power and launches much better ................bugger for the auz built donkeys :pirate:

fanks for the replys :cheers:

  • 6 months later...

Yup

Heard the latest with andra rules?

Run faster than 12.99 and get a 4 point harness and tailshaft loop or GTFO

Rang reno yesti and sooked

Didnt help one warning the go home so for 160$ u get 2 runs

Yup

Heard the latest with andra rules?

Run faster than 12.99 and get a 4 point harness and tailshaft loop or GTFO

Rang reno yesti and sooked

Didnt help one warning the go home so for 160$ u get 2 runs

thats just shit. rules are getting worse and worse and cars getting better, where is the sence in that

nup no refund

u get 1 pass if ur mph is to high or time to low they will warn u straight up

2nd pass if go again ur out c u later

reno is a top bloke and i spoke to him to at length yesti he said look come down have a pass see where ur at, run it agian and roll in at 3/4 track ,I said hold up whats the phucking point in that ? he said iknow i know iam on ur side its just andra holding us to it now

i said cant u just bin andra or change the rules? he said been at them the last 3 months with rule changes to suit new cars that can do a 12.99 with just an edit or flash tune . andras response to rule changes are shocking , stuck in the 70's , but reno is trying his hardest as hes the bloke putting his ballock on the line still for the sake of us !

as far as binning andra ..............its in the making , trying to secure the same insurance holder thet heathcote park has

( heathcote has next to no rules stick a v8 in a shopping trolley for all they care )

so were in a rock and a hard place, but for the sake of having racing in s.a ill still spend the $160 for 2 runs , just means if u feel uve funbled the launch just roll it through and have another go and every shot it has to be the money shot.

iam in a crappy situation my self , nearly all my driveline in hanging on by hopes and dreams and i really wanted 2 shots to have a easy take off so i could see my mph ( easerly in the 12.99 bracket with soft take off)

now i just have to go for it ........................but thats racing and i suppose we should be lucky we still have racing in s.a

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...