Jump to content
SAU Community

Recommended Posts

yep 3040 (3082 in new terms) is way too much compressor for a gt30 hot side.

if you already have the gt35 and can easily get a smaller rear then that would obviously be the easiest and cheapest option. a lot of people seam to get good results with the .63 gt35 which is strange because its a bit of a mismatched turbo. personally i'd prefer a larger housed gt3076 but each to their own.

just keep in mind, even if you get similar results the larger reared gt30 will be easier to drive than the .63 gt35, it will come on more progressively and make traction a lot easier

I reckon it should be fine mate i have a GTX3071 with .82 internal gate made 288kw @ 21psi without boost control issues im now at 307kw @ 18psi with 25psi coming soon. YAY! Just make sure u dont use 1 of them dodgey divorced front pipes

so im thinking about getting the GT3076 with a internal wastegate .82 rear i wonder if that will be ok for 290-300rwkw without boost problems

What boost problems? It would have to be THE most common turbo on an RB25DET for an obvious reason. There are countless 3076s with internal wastegated 0.82 rears making 290-300rwkw. If you choose the GTX3076 they seem to respond well to higher boost levels above 20+psi.

But geeze looking at NYTSKY's thats a lot more top end with the 35! I know it has a lot of other mods and a fresh engine etc but if your after a car to break traction and do naughty things then its quite a good option. But if your after an all round fast car with linear power/torque then GT30 it is.

yeah i just sold my gt3582r today for 1500 and im looking at 1480 for the gt3076 with the 5 bolt internal wastegate .82 rear just not to sure what todo about a dump pipe as i wont be able to drive it to the exhaust shop

oh i though people had problems with boost control i must of misread something hahaha but yeah hopefully with 290-300 the gt3076 will still be naughty hahaha

Is it true that nowadays the Garrets are costing as much as or less than the Hypergears, which are not a fully bolt on either.?? Re: custom intake, 90deg elbow, water lines etc, the only thing that bolts on in the HG and not on the garrets is the dump. Hence makes a lot more sense to go Garret..Or did I miss something..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...