Jump to content
SAU Community

Recommended Posts

Hello, I continue in a frustrating debate with my friend who bought a Ford Corsair for 300$ and continues to tell me that it has a RB20 or an RB25 N/A in it.

This quite pisses me off because I know skylines look really good but if he picked a ford up for 300$ with the same power, it shits me off.

Is there anyway I can proove it's not an RB engine without seeing the car, his pop (A mechanic) said in his quick inspection it had the same engine as my N/A skyline.

Is this possible lol.

(AHHHH It's pisses me off ) xD

Link to comment
https://www.sau.com.au/forums/topic/389819-ford-corsair-rb-engine/
Share on other sites

Ford Corsair UA - AustraliaFord Corsair UA250px-1989-1992_Ford_Corsair_%28UA%29_GL_sedan_02.jpg

Ford Corsair (UA) GL sedanManufacturerFord AustraliaProduction1989–1992 (Built by Nissan Australia)AssemblyClayton, AustraliaSuccessorFord TelstarBody style4-door sedan

5-door hatchbackLayoutFF layoutEngine1974 cc I-4

2389 cc I-4RelatedNissan PintaraBetween 1989 and 1992, the Ford Corsair name was used by Ford Australia for a badge engineering version of the Nissan Pintara (known in development as 'Project Matilda'), under a model-sharing scheme known as the Button Plan. It was offered as a 4-door sedan and as a 5-door hatchback, in GL and Ghia trim levels with 2.0L (CA20E) and and 2.4L (KA24E) four cylinder engines. The Corsair was intended to replace the Mazda 626-based Ford Telstar, which was imported from Japan. The two were sold side-by-side in the Australian Ford range, with the Telstar only available as the high-performance TX5 hatchback. When Nissan closed its Australian plant in 1992, the Corsair was discontinued and the imported Telstar once again became Ford's main offering in the medium size segment, until being replaced by the Mondeo in 1995.<BR style="CLEAR: both">

Oh, FFS. Beaten by mlr!

Glad school holidays are almost over....

Taken from Wiki....

Ford Corsair UA - Australia

Between 1989 and 1992, the Ford Corsair name was used by Ford Australia for a badge engineering version of the Nissan Pintara(known in development as 'Project Matilda'), under a model-sharing scheme known as the Button Plan. It was offered as a 4-door sedanand as a 5-door hatchback, in GL and Ghia trim levels with 2.0L (CA20E) and and 2.4L (KA24E) four cylinder engines. The Corsair was intended to replace the Mazda 626-based Ford Telstar, which was imported from Japan. The two were sold side-by-side in the Australian Ford range, with the Telstar only available as the high-performance TX5 hatchback. When Nissan closed its Australian plant in 1992, the Corsair was discontinued and the imported Telstar once again became Ford's main offering in the medium size segment, until being replaced by the Mondeo in 1995

CA20E

The SOHC 2.0 L (1974 cc) CA20E produces 105 hp (78 kW) and 120 lb·ft (160 Nm). Bore is 3.33 in (84.5 mm) and stroke is 3.46 in (88 mm). It was used from August, 1981 through 1991. Fuel was delivered via Multiport Fuel Injection. Dual sparkplugs per cylinder were used in some variants of this engine for enhanced combustion efficiency, and to combat poor head design.

It was used in the following vehicles:

KA24E

The KA24E was a SOHC12-valve engine produced from July 1988 through January 1996. It uses SEFI fuel injection, and features forged steel connecting rods, an internally balanced forged steel crankshaft, and a cast aluminum intake manifold.

[edit]Specifications

  • Bore × Stroke: 89.0 × 96.0 mm
  • Max power: 140 hp (105 kW) @ 5600 rpm
  • Max torque: 152 lb·ft (206 Nm) @ 4400 rpm
  • Valve Configuration: SOHC, 12 valves
  • Compression ratio: 8.6:1 (9.1:1 for early 1989 240SX)

[edit]Applications

.

Edited by PN-Mad

sounds like your mate is very confused . . . a FWD CA20E is Very different to a RWD/AWD RB. . . the CA was a small port/SOHC cam motor that was more suitable for taking nanna to her lawn bowls and not much else

you are petty little boy Brendon....

Big deal if it could beat yours, most things on the road can....

Who waves the flag when you guys start your traffic light grand prix?

As everyone has said, go to the drags for bragging rights, everything is speculation until then...

was not saying pretty :)

I was interested to see if someone had gone to the effort of putting an RB into something abit different like a corsair and thought maybe there was some questions/pics/details about it.

All i find is some kid whinging " it shits me off." "(AHHHH It's pisses me off ) xD " if it were to beat his n/a skyline....

LOL, what about if it has the KA25E, any chance of him being able to beat me if I reverse?

KA25E? hmmm didnt know about that motor,Thought there was only a KA24E , as used in the states (200SX?)but often replaced by a SR20DET

either way there wouldnt be room in the engine bay of a corsair for a transverse mounted RB25 . . too long

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...