Jump to content
SAU Community

Recommended Posts

Just throwing this out there - found a car cover you're really happy with?

Been doing some shopping around as the Stagea gets parked for a week at a time out Western QLD - windy, dusty and hot.

Tried a few from the usual retailers but they're all too big! A poorly fitting cover can do as much damage as the elements so

if you have one or know of a well fitting one then let us all know

cheers.gif

Link to comment
https://www.sau.com.au/forums/topic/390363-found-a-good-car-cover/
Share on other sites

I've got an Autotecnica cover. Completely waterproof and hail proof. Check out their website... http://www.autotecnica.com.au/covers.html. They are also sold by Auto One and Supercheap Auto. I'm happy with mine. I don't have a garage so the car gets covered when left for extended periods.

Just throwing this out there - found a car cover you're really happy with?

Been doing some shopping around as the Stagea gets parked for a week at a time out Western QLD - windy, dusty and hot.

Tried a few from the usual retailers but they're all too big! A poorly fitting cover can do as much damage as the elements so

if you have one or know of a well fitting one then let us all know

cheers.gif

Further to my last posting...

http://www.superoneauto.com.au/ is the distributors website in OZ. Sam Silvestro is the owner.

Hey rosella do you remember which size you got? Sedan or 4wd profile?

At a guess from looking at the sizes you'd have to go with the x-large car ones as I think the stags are more than 490cm long

This is mine. A Kenco Tyvek medium station wagon (4800 long x 1800 wide x 1300 high (liberty size)). It's fairly snug as I originally bought it for my R31 wagon and when I put my wing on the Stag it will probably be too tight around the rear roof line and I'll have to purchase the larger cover. The next size up is 5300 x 1800 x 1200 (Falcon/Magna).

It's easy to put on and protects from everything (except hail). It's washable and it's made in Oz.

web.jpg?ver=13282733250001

web.jpg?ver=13282685700001

As far as I know, which might be nothing unsure.gif, the dimensions of our wagons are as follows (LxWxH):

C34 - 4800 x 1755 x 1495 (according to wiki)

M35 - 4785 x 1760 x 1510 (according to Northshore Prestige website)

R31wgn - 4650 x 1690 x 1395 (according to R31SkylineClub website)

I know the last one isn't a real Stag, but I thought I'd add it for reference. Happy to be corrected on these as well.

Cheers.

Are your mirrors tucked in? I find it hard to tell, but if not it might be an easier fit if they were.

Going by the extra spoilers mine has, do you think that the medium or the large would be more suitable? I'm thinking large but it also looks like there is a bit of slack in the roof for some extra length...

208-Stagea5.jpg

Thanks guys some good info. I'd like to have a wagon profile to get the best fit but it appears autotechnica only do a full size wagon.... Might have to try a kenko like QJQ's. Seems like it's going to be tight though as it looks quite snug on the 35 and the 34 is a bit longer.

Yeah the mirrors are tucked in. I used it again today and checked around the rear and it looks like it should accommodate a rear wing/spoiler (yours is the same one that I've had sitting patiently in a box for over a year waiting to be painted). Being lightweight, the cover sure is fun trying to put it on by yourself even in the slightest breeze. But once it's on it definitely won't blow off - I don't even bother with the strap that runs under the car. I think the Kenco large wagon cover would be too big at 50cm longer than mine. Another one I forgot to mention that Kenco do is a Pathfinder one at 5200mm long, but that may still be too big. Maybe a larger one could be modified/sewn up???

Autotecnica also appear to do a Tyvek cover for a large 4WD that is up to 4900mm long which may suit the C34 better and I don't think the extra 10cm would make it too loose on a M35.

Cheers

Looks like the cover I have may not be made anymore.

Anyway, I'll put it on the car and take a photo to upload in the next few days.

That'd be great, yeah it's a shame they only seem to make the full size one now. Just out of interest I've been sending out some queries and the biggest quote I have received so far is $595AU, admittedly that's a full custom cover but damn....

One I did find interesting was $90US from Protech car covers, comes with cable lock and 3 years warranty. Kind of a PITA to claim warranty overseas but the price seems pretty reasonable for what looks like a good cover. Still waiting on more replys so anything else interesting and I'll post it up.

That'd be great, yeah it's a shame they only seem to make the full size one now. Just out of interest I've been sending out some queries and the biggest quote I have received so far is $595AU, admittedly that's a full custom cover but damn....

One I did find interesting was $90US from Protech car covers, comes with cable lock and 3 years warranty. Kind of a PITA to claim warranty overseas but the price seems pretty reasonable for what looks like a good cover. Still waiting on more replys so anything else interesting and I'll post it up.

Is that the one that was on ebay a while ago?

I've been to see these guys and they offered some advice on what materials to look out for and try and avoid, etc. (not that I can remember any of it :(). Might be worth giving them a call, and seeing if they can recommend something, then you can order it from their online shop.

http://www.covercraft-pacificshop.com/index.html

Is that the one that was on ebay a while ago?

They may have had one on there but I was looking on their website.

I've been to see these guys and they offered some advice on what materials to look out for and try and avoid, etc. (not that I can remember any of it :(). Might be worth giving them a call, and seeing if they can recommend something, then you can order it from their online shop.

http://www.covercraf....com/index.html

Yeah I sent them an email and am just waiting for a reply. Would be nice to be able to get Australian made if the price is reasonable.

As promised, here are some shots of the cover on the car.

BTW, it says 'L' on the cover bag as well as the tag on the cover.

Nice, looks like a pretty good fit - heavy duty too. I couldn't find a smaller size than the Holden Dunnydoor wagon one they offer so I ordered a Protech cover from the States. Shipping just about doubled the cost but it's still pretty much in line with the Autotechnica ones retail anyway, hopefully the quality is as good. I'll post up some pics too once it arrives.

Nice, looks like a pretty good fit - heavy duty too. I couldn't find a smaller size than the Holden Dunnydoor wagon one they offer so I ordered a Protech cover from the States. Shipping just about doubled the cost but it's still pretty much in line with the Autotechnica ones retail anyway, hopefully the quality is as good. I'll post up some pics too once it arrives.

It's actually very thick as it's for hail protection.

Yeah, It has four straps which are not done up. One front, rear and two between the wheels. Bit of a pain trying to get it across under the car though as it's lowered and the ground I park on is not that level. Generally, just do the end ones only since it's a snug fit.

It has elastic at both ends, so fits under the front bar very well and the back not so since I have a tow bar. However, it's never blown off in any of the storms I've experienced..

I paid $229 at Nowra Repco two Xmases ago. On special and I've never seen another one since. Trying to get one for my partner's Rav 4 3 door Cruiser.

post-72042-0-30667500-1329128455_thumb.jpg

  • 1 month later...

Well I finally got my Protech car cover from the States and I'm very happy with it. The sizing is spot on and the cover fits really well. It is pretty well water proof - we've had some wild rain up this way and when I pull the cover back she's still dry underneath. There is a soft finish on the inside and comes with a cable and lock to secure it to your car - enough to stop someone ripping it off in a couple of seconds anyway. I'm on the coast and every now and then the winds get pretty big and were getting under the car and inflating the cover like a balloon over the bonnet area as this bit isn't as snug as the rest. A bit of rope around the back of the front wheels and up under the windscreen stopped all movement. Good as gold

thumbsup.gif

post-88334-0-74597600-1331726192_thumb.jpg

post-88334-0-58776300-1331726394_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...