225s on stock 205 r32 wheels?

[DLuded]

has anyone put on 225s on the stock r32 wheels which are 205 wide?

i know they will pop out a little but has anyone done this before??

Thx for ur help

[Morgs]

Done it, they fit

Cheers,

Rick

[DLuded]

THX morgs

[BHDave]

Ive got them on the rear, wouldn't recommend on the front as i can feel them flopping around when cornering hard

[DLuded]

yeah i just read some other posts about them being on the front stuff up handling

well would it be all right if i had 225s on the back and 205s on the front?

[(B1) MR_fanny]

i have them on the back of my 33 and i can feel the tyre flex....it sucks balls feels like theres a delay in response. new swaybars helped but can still notice it abit.

[mist]

just put 205s front and back and be done with it... should be a few bucks cheaper too heheh. or go for the drift look, stretch 185 or 195 rubber onto the rim. can be done no prob, just the workers at the tyre shops hate to do it cuz it's harder work for them. say goodbye to sidewall flex and hello sideways action

[slip]

you could try 215's.

[slip]

you could try 215's. im using 205's on my 7" front wheels, they are fine.

[cyco]

I used to have 215s on the back, and 205s on the front, possibly 50 series profile.

Since then I've replaced them with 225/55s all round, haven't noticed the flex a huge amount, but it's still noticable on hard cornering, might've been better off with 215s on the front methinks.

I'm just curious to see how they wear, as there's a slight buldge in the sidewall even with the right tyre pressure.