Jump to content
SAU Community

Recommended Posts

hey guys contimplating getting a ztune style bonnet in carbon then colour coding it.

however looking at pics im noticing the rtune style; the fins are more aggresive/sharper/ and higher. is this true?

some of the ztune bonnets i see the fins are real flat and curvy doesnt look very good

Link to comment
https://www.sau.com.au/forums/topic/390580-z-r-tune-style-bonnet/
Share on other sites

Hmmm, i was under the impression R-tune and Z-tune bonnets were the same thing, ie: the z-tune has an R-tun bonnet? (we all just end up calling it a z-tune bonnet anyway?)

Post up the pics you are referring to.

Keep in mind, any that aren't originial/genuine parts are probably going to have their differences as no doubt different people have different moulds etc...

R-Tune is just the tuning level of what Nismo has done to the car.

Body kit wise, it will be up to the owner on what they wanted.

If they went for a bonnet upgrade, it would most probably be a Nismo Z-Tune one.

Unless you got pics?

oh k makes sence. well then different companies must make different styles because theres some ztune bonnets look terrible but some are real stand out and sharper .

il post up pics tonight

ok this is what im talking about.

this is the bonnets i like:

DSC00412.jpg

2010-JAPO-Motorsport-Nissan-Skyline-R34-GT-R-Front-Picture-588x391.jpg

this next picture is called KNIGHT RACER HYBRID STYLE- notice is sharper on the corners?

knightracerhybridcarbonstyle.jpg

this is genuine R TUNE- notice the fins start closer to the front of the bonnet?

genuinertune.jpg

notice this is also sharp on the corners?

rick_2008may24_030417.jpg

see how this is rounded edges, not as distinct as the one before but still stands higher

IMG_3591.jpg

now this i recon looks sh*t

its called the SEIBON DS STYLE

seibondsstyle.jpg

user1059_pic790_1292665077.jpg

so can you see the difference? im not sure what styles are available in melbourne, like from jap warehouse, or jsai or whatever

because il be colour coding it so carbon isnt my concern

cheers

Edited by w34ponGT

no thats not the point im trying to make

i am attention to detail so little things like that do concern me..

and there are aftermarket styles that are more aggresive and thats what i want

Edited by w34ponGT

no thats not the point im trying to make

i am attention to detail so little things like that do concern me..

and there are aftermarket styles that are more aggresive and thats what i want

Interesting...

Good attention to detail!

But you like the Nismo Z-Tune bonnet but prefer the more aggressive KNIGHT RACER HYBRID STYLE look of the bonnet?

Y won't u order it from the uk?

I ordered their 400r carbon front lip and they were great to deal with. Pretty fast delivery and the quality and fitment was outstanding

I think I worked it out before that it would cost about $1500 including postage to get it to my door, not bad considering their products are alot better than pretty much every Aussie distributor

im just a bit nervous about damage through shipment but it might have to be an option

Look at it this way, no matter where you buy from, (unless they are located in Melb) there will be shipping... so its just as likely to get damaged being sent from sydney to melb as it is from the UK to melb, only difference is it probably changes hands a few more times when coming from over seas,

That said, UWISSH! gave you some great first hand experience, so take that into consideration

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...