Jump to content
SAU Community

Recommended Posts

Make your own, they arent anything special. Get some OFC audio wire and make up a solid copper plate for the engine with tapped threads. Make sure you use spring washers so the bolts bite in and not come loose.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6228309
Share on other sites

  • 4 weeks later...

Ok finally got all the gear i need to make to make my own kit. Can anyone recommend which parts it would be beneficial to add better grounding points? I know the throttle bodies could use it.. what else? Im trying to achieve faster smoother gear changes and less lag.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6269250
Share on other sites

  • 2 weeks later...

Well it's in.. I'm happy to report it was not in vain. I've only drivin it twice since the install but the difference is already evident. The biggest difference is in sport mode but it's noticeably better in auto too. Also I chirped into second gear today. It's never done that before! yes.gif

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6283672
Share on other sites

As an auto electrician of 14 years i fail to see how adding extra earths to various parts of your car makes any difference what so ever unless your car has significant high resistance and bad connections which is highly unlikely.

Ive fixed many bad earths on various cars, like the earlier R31 Skyline which had a slight voltage on the o2 sensor ground. This caused fuel mapping issues. My point it, unless your car has stray voltage on earth wires caused by bad connections to ground (very unlikely) a grounding kit will do nothing besides lighten your wallet.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6290971
Share on other sites

As an auto electrician of 14 years i fail to see how adding extra earths to various parts of your car makes any difference what so ever unless your car has significant high resistance and bad connections which is highly unlikely.

Ive fixed many bad earths on various cars, like the earlier R31 Skyline which had a slight voltage on the o2 sensor ground. This caused fuel mapping issues. My point it, unless your car has stray voltage on earth wires caused by bad connections to ground (very unlikely) a grounding kit will do nothing besides lighten your wallet.

Thank you for your comment.

Quick questions.....do you own a V36 Skyline? Have you installed grounding wires on said V36 and done back to back testing?

If the answer to either of these questions is no, then thanks for the input but until you can answer yes to both, it doesnt really provide any great insite.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6291156
Share on other sites

As an auto electrician of 14 years i fail to see how adding extra earths to various parts of your car makes any difference what so ever unless your car has significant high resistance and bad connections which is highly unlikely.

Ive fixed many bad earths on various cars, like the earlier R31 Skyline which had a slight voltage on the o2 sensor ground. This caused fuel mapping issues. My point it, unless your car has stray voltage on earth wires caused by bad connections to ground (very unlikely) a grounding kit will do nothing besides lighten your wallet.

I tend to agree. I see grounding kits as an opportunity for a company to make some money off people who don't want to clean their factory ground points. I put a kit on my J30 Maxima many years ago, it did absolutely nothing. As for the V35/36, there has been differing opinions, some say it made no noticeable difference, others say it only sharpened the auto shifts. Either way, I have an 6MT and my technical background tells me not to bother with a grounding kit.

You really don't need an intimate knowledge of every car to make a technical determination on a product like this.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6291246
Share on other sites

doesnt matter what car it is. if a grounding kit makes a difference all you are doing is putting a bandaid over a fault like dirty or rusty connections, and i doubt your car has this.

example. if you put a new ground to your block and then a new ground to the head you have done nothing. the engine is one massive earth bus of 0 ohms. 20 earths to the motor is no better than 1 properly sized one. these cars and all modern cars have massive earths already otherwise your starter motor would not work because it is the largest current drawing device in the car.

do a google search on it. the only example i can find that proved it works was on a rusty old subaru. and it worked because the cars original earth point were totally rusty.

if you understood ohms law you can apply this to any car. multiple earths to the same motor is no better than one of correct size.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6291247
Share on other sites

Agreed. I am not trying to point the finger at anyone or insult anyone. But sometimes it can be hard to separate the placebo effect from actual benefits on issues like this. For example, I have had people swear that a strut tower brace has reduced body roll, even though it is impossible for a strut tower brace to do such a thing.. I even have a picture of a newspaper artice with someone claiming a transmission cooler has improved engine power by about 10%..

Personally I can't technically understand how a grounding kit can possibly do anything on a car with good factory connections and ground points, but at the same time, someone may see real benefits from a kit, quite possibly due to an existing, but unknown, fault with their wiring.

At the end of the day, people are going to add these kits anyway and many are going to claim benefits. so it isn't really worth the battle..

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6291552
Share on other sites

I was a sceptic. But i figured ill give it a go. Whats $50 on a 40k car if it improves something thats really bugging you?? Its not like you remortgaged your house for it.. I never said it was a massive difference, but it does feel a little different. If it is placebo then so be it.. Its done.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6291710
Share on other sites

^^ this is pretty much the reason I installed one on my J30 years ago, many people clamied significant improvements, and I figured for a few $$ (I made my own too and is was much less than $50), it is worth the experiement..

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6291798
Share on other sites

The Paddle shift changes in my car sped up a decent amount, especially down shifts which are now almost instant.

In standard auto the car hunts for gears less.

It is still no Ferrari inspired box but definitely improved.

The car is 0% faster.

MPG is EXACTLY the same.

Dozens of people on myg37.com say the same thing.

Dozens also say that their car now has 10hp more and are obviously idiots.

You can quote as many electrical facts to me as you like, explaining why the grounding wires have done ABSOLUTELY nothing and that it is just a worldwide aftermarket parts provider conspiracy. The above are the facts, as I have experienced them, in my car, with my own senses. Whether the skinny grounding wires that Nissan installed are not sufficient and somehow affect the ECU, I do not know. These cars have waaaay too many electrical systems for me to even want to try to comprehend what affects what. All I know is, the grounding wires made a difference and I am happy. End of story for me.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6292258
Share on other sites

Ive made up lots of kits and all my customers agree it made a difference. Try looking at the Ecu signals on a CRO you can see how the signal is smoother after the kit was installed. So in that case for example the Ecu wont be trying to adjust everything to signal that isn't constant. I agree it wont give more power but it will make the car feel smoother.

Manufacturers use the smallest earth wire that will still do the job to save on costs.

Link to comment
https://www.sau.com.au/forums/topic/391245-grounding-kit/#findComment-6292507
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...