Jump to content
SAU Community

Recommended Posts

A few weeks back the old stag was running a bit rough and the engine light came on... I thought I got some bad fuel so I got some fuel treatment and injector cleaner and disconnected the battery for 24 and it came good.

It only seems to be an issue as the motor warms up then after that she runs ok but the engine light remains on.... Could it be the plugs and if so any1 know the replacement number.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/391653-engine-light-prob/
Share on other sites

It is unlikely that the coils are at fault.

AS mentioned above... get the fault code and then you won't have to speculate.

If I was to take a guess it sounds like your Bank1 or Bank2 sensor is on its way out.

Stuart, if you pull the codes from your car as per the instructions found on either of the links below, we can help you with it and it won't cost you anything.

M35 Stagea Info forum

http://www.m35stagea.info/forum/viewtopic.php?f=6&t=11&sid=d6d780c4e99ca60948000875c6272fd8

SAU (in the Stagea DIY's sticky)

http://www.skylinesaustralia.com/forums/topic/261557-ecu-fault-codes-the-easy-way/

Also, any Nissan dealership can pull any/all codes for you via their Consult.

what cam said is true...u can go to a nissan service/dealer but be ready to part with some money...if i remember nissan camberwell charged me $120 for roughly an hour's work of diagnostic & repairing one of the circuits on the passenger side intake valve

the guys at the dealer were amazed on how i knew which codes came with the CEL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...