Jump to content
SAU Community

Gtr Parts / Rb26 / Aftermarket

laspy
 Share

Recommended Posts

laspy Collaborator

laspy

Posted
Posted

FOR SALE

1. RB26 VIRGIN ENGINE BLOCK (BARE BLOCK IN GOOD CONDITION) $500

2. R33 GTR RB26 CRANCKSHAFT (purchased brand new and used for approx 15,000 km's) $350

3. RB26 RACEPACE FORGED PISTONS (used for 20,000 km's) $400

4. RB26 ADJUSTABLE CAM GEARS (good condition unsure of brand) $200

5. RB26 COMPLETE HEAD (head fully rebuilt less than 20,000 km's ago. Cams to be dropped back in and away you go) $500

6. RB26 STOCK INTAKE PLENUM AND THROTTLE BODDIES $150

7. RB26 ENGINE COVERS (front and rocker covers all in good nick) $250

8. SPLITFIRE COIL PACKS (less than 20,000 km's - good condition) $350

9. 700CC INJECTORS (pushed 400kw without any issues) $350

10. GARRET -5 TURBOS (very good conditions done less than 20,000 km's) $2100

11. DUMP PIPES - XFORCE WITH 02 SENSORS (good condition) $250

12. POWER FC WITH HAND CONTROLLER (good condition a few pixels burn out on hand controller screen) $700

13. OIL FILTER RELOCATION KIT & CUSTOM RACEPACE OIL COOLER WITH METAL DUCTING $250

14. CATCH CAN ALLOY $80

15. RB26 R33 GEARBOX (working fine when in car) $500

16. EXEDY TWIN PLATE CLUTCH (working fine in car 70% meat left. RRP $2,350) $800

17. RB26 R33 GTR GEARBOX (pull type - comes with heavy duty aftermarket clutch) $800

Contact Sam 0439 702 702

Link to comment
https://www.sau.com.au/forums/topic/391654-gtr-parts-rb26-aftermarket/
Share on other sites
laspy Collaborator

laspy

Posted
  • Author
Posted

Ive had a lot of interest in all parts but unfortunately im strapped for time as im going overseas on Saturday (late notice). I will do the best I can to respond to all but cant promise anything.

I will be back on the 1st of March and will upload photos of everything :)

laspy Collaborator

laspy

Posted
  • Author
Posted

Also will have up for sale when i get back

20. JJR 40mm Alloy Radiator

21. Second larger catch can

22. Greddy radiator neck

23. Alcon front brakes (complete)

24. Custom 3.5 inch exhaust

25. Cusco strut brace

26. 18x9.5 BBS LM's

27. Custom 3 pod holder with Defi Boost, Water and Oil temp gauges - Defi controller

Probably more stuff to come. Will adjust add properly with prices and photos of everything when i get back on the 1st.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...