Jump to content
SAU Community

Turbo Screwed

fishola

By fishola,
in Four Door Family & Wagoneers

 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I just meant they probably haven't done one before which means they may take three times longer to do the job (as they don't have special tools etc that are required). Most places will over quote unknown jobs too.

hypergear Grand Master

hypergear

Posted
Posted

Your turbo feels the same as a Sierra Stage 1 one setup!.....to say that it wont be laggy at all is wrong!....and yes I have driven yours and numerous other setups.

That was the older profile, the current profiles are once again totally different just like every thing else we do. They also made to work with stock oil feeding line, we no longer supply braided lines for that model.

Jetwreck Grand Master

Jetwreck

Posted
Posted

I look forward to testing your unit the next time someone brings one to me. Great that your using the standard lines.....bit of a pain in the arse for the guy installing wave.gifbut definitely the better option imo.

slippylotion Mentor

slippylotion

Posted
Posted

That was the older profile, the current profiles are once again totally different just like every thing else we do. They also made to work with stock oil feeding line, we no longer supply braided lines.

What are the wheel and core specs of your new unit and pricing?

Cheers

andy65b Veteran

andy65b

Posted
Posted

Hey guys found a guy from wollongong, who is able to do a standard rebuild to the turbo so sending it his way tomorrow so will see how it turns out and let you all know...

Cheers Gav.

Will be interesting to hear what they build for you.. I have note heard of anyone being able to rebuild the stock turbo to the same specs. :whistling:

  • 2 months later...
Jetwreck Grand Master

Jetwreck

Posted
Posted

Anyone know of someone, workshop or owner, who has removed a turbo from an m35 in the Wollongong area??

Mines on the way out. I'm doing house renos too so I'd love for someone to do the whole process for me.

If you want to bring it up to Sydney I can do it for you.

dozzer Rookie

dozzer

Posted
Posted

If you want to bring it up to Sydney I can do it for you.

Yeah it shouldn't be a problem coming to Sydney, I work at the airport anyway. Where abouts in Sydney are you?

I'm not in any immediate hurry to have it fixed, it still drives great (appart from the random growl over 4k revs), I'm just wanting to know some prices for the time being so I can get some cash together.

The stagea is not my daily so it can be off the road for little while.

Thanks for your help

Jetwreck Grand Master

Jetwreck

Posted
Posted

Yeah it shouldn't be a problem coming to Sydney, I work at the airport anyway. Where abouts in Sydney are you?

I'm not in any immediate hurry to have it fixed, it still drives great (appart from the random growl over 4k revs), I'm just wanting to know some prices for the time being so I can get some cash together.

The stagea is not my daily so it can be off the road for little while.

Thanks for your help

Give me a buzz on 0406754304 when you get a chance.

cheers

Craig

Jetwreck Grand Master

Jetwreck

Posted
Posted

Yeah it shouldn't be a problem coming to Sydney, I work at the airport anyway. Where abouts in Sydney are you?

I'm not in any immediate hurry to have it fixed, it still drives great (appart from the random growl over 4k revs), I'm just wanting to know some prices for the time being so I can get some cash together.

The stagea is not my daily so it can be off the road for little while.

Thanks for your help

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...