Jump to content
SAU Community

Recommended Posts

yeah the civic was out there, pritty good for a stockie!

there was this crazy little white old civic with a turbo integra engine. Now that was interesting. It was hunting down a worked wrx with cheater tyres.

My civic went well ... but we ran out of brakes at one stage, and of course didn't bring any spares for the day. So we ran around Goulburn looking for pads. Supercheap didn't have any, but they had ones that were roughly the right size. So we bought those, and an angle grinder, and "made" them fit. :alien: At least we got back out on the track. :thumbsup:

The old EB2 Civic has IIRC, a T28 running 13psi boost. In a car weighing about 700kg, that means fast!!!!! At its last 1/4mile run at WSID, it got a 12.8.

I was lucky enough to have a drive on the day, and oh my god ... that much power was never meant to be put through the front wheels. Especially since he had just blown up the gearbox, and had replaced it with another but without LSD. It was scarrryyyy!!! And because of the short wheelbase, it is twitchy as all hell when braking hard. Pedal placement was a nightmare ... all offset to the left, and for me to reach the pedals comfortably, I had to sit disturbingly close to the wheel ... I guess not a problem for others, but I didn't start off feeling comfortable.

Unfortunately, the old civic trashed its diff, so was still at the track when we locked up ... waiting for the tow truck.

On another topic, was the green S14 yours Carlo, or a mate of yours? What happened to it?

hey, at least you didn't blow your engine up first :thumbsup:

Now you know why I'm so worried about grenading my RB26 and won't track it until it's fully sorted for circuit work :)

hey, I had a big sump with baffles. maybe it cant work from the box in the boot tho?

You obviously forgot to connect it up to the fuel tank... DUH!!!!!

n00bs :thumbsup:

when a driver of a gtr gets excited they rev the engine to hard (8500-9000)

cause the engine is spinning so hard all the oild gets pumped to the top of the engine becasue the sump only holds 5 litre maybe 6 if you really top her up

constant over revving of the engine leeds to what we call the duncan syndrome (gtr engine go bye bye) due to a lack of oil in the sump which leads the pressure loss when the pic up starves

solutions are many

1 dont over rev the engine 100% of the time on the track

2 overfill your oil (not recomended)

3 oil cooler to increase capacity of oil in engine

4 instale sump baffels to stop the starvation

5 head restrictor

6 larger sump

we love you druncan

now that i have bagged him out something will probably happen o my engine (touch wood)

sbs is when you have a gtr owner that is too scared to go to the race trace and sights sump bafels as an excuse

merli

lol

lol

lol

lolo

lol

blah blah blah :thumbsup:

Just you wait :) I need to reclaim the record back off Dundan at EC :D

What's it set at these days? :)

you big girl merli

you comming saturday

I'm going to try and make it out in the morning...

I have a wedding starting at 3pm in Waitara (somewhere up north woop woop) so it's gonna be a loooooooooong day.

but if there's no oil in the sump, how are baffles going to help.  I guess you mean there is still some, but without baffles it is distributed over the whole sump and hence the level is too low near the pickup?

It's a combination of not enough oil, and oil moving around the sump at high cornering loads. Nothing underneath the oil pickup left to squirt up into the head.

Baffles help keep some oil underneath the pickup, larger capacity sump helps overall oil reserves and cooling, oil cooler does the same thing, and most importantly, and oil gallery restrictor in the head restricts how much oil gets sent up into the head (too much in standard configuration) and leaves more oil in the sump.



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...