Jump to content
SAU Community

Recommended Posts

Hi

I have been a bit slack of late trying to sell all my gear as of other projects but here is the list of what's left, please remember people if i don't reply to you, it's because i will be at work out of town i usually do 4-5day stints so be patient please will get back to you as soon as i can. Also i will not be paying for any postage for anything so don't ask, just about all these parts are from japan and the postage for some of these parts were more the actual part itself. No time wasters genuine buyers only.

- Rays Gram Lights 57F Pro Titanium Lip Wheels with tires 18x10 +20 offset cost me over $4k selling for $2500

-Hankook RS-3 Tyres 285/35 R18 x2 New never used $600

- Carbon Look Mines Style Mirrors, Electric very good condition $300

- Carbon N1 holes for front bumper $100

- Nismo Side Clear indicators $60

- Nismo Carbon GTR Wing end caps $100

- Greddy E-01 Boost Controller - $300

- Bride Front Seat Rails Left and Right Type RX suit Ergo II, Brix II, Pros, Xax2 Seats - $300 for both.

- Superior Auto Creative Full Carbon Fibre Dash kit, includes Arm Rest Cover, Gear boot, Handbrake Boot and the whole dash Cost me $1500 selling for $800

- Sniper Carbon Fibre Kick Panels - $80

- Carbon Fibre Gauge Cluster Surround $100

- HKS Type R Intercooler 600x300x100 and piping $700

- Top Secret Style Stainless steel Catch with built in Squirter Bottle - $100

-Sard Air Bleeder Coolant Tank $50

- Billion Alloy Power Steering Tank $150

-Cusco Front and Rear Sway Bars $600

-Tein Monoflex Coilovers $1500

- Cusco Hicas Lock Bar $300

- Ikeya Formula Arms, consist of Front top arms and the 2 Rear Top arms $800

- Apexi Blow off valves x2 $150

- Koyo Alloy Radiator $300

- OS Giken Triple Plate clutch with push converter kit $2000

- R34 N1 Nur 2002 model Engine with Tomei 260x9.15mm Cams and Gears + Belt, Ross Harmonic Balancer, Hi octane Racing Sump Extension, Spool Head drain kit. done approx 25000kms from new $6500

- AP Racing 6pot Front Calipers, with 270x36mm 2 piece fully float rotors, (needs new rotors) $2000

- AP Racing 4pot Rear Calipers with 330x32mm 2 piece rotors, near new $2500

- Jun Style Carbon Fibre Bonnet with Aerolatch bonnet pins $700

Link to comment
https://www.sau.com.au/forums/topic/391803-r33-gtr-parts-clearout/
Share on other sites

n1 carbon vents!!

sent to melb for 100???

wish u werent in qld like the sound of the bonnet! can u send me pics of it? may entice me to chase up a courier or something lol

SOLD PENDING PAYMENT

- Rays Gram Lights 57F Pro Titanium Lip Wheels with tires 18x10 +20 offset cost me over $4k selling for $2500

-Hankook RS-3 Tyres 285/35 R18 x2 New never used $600

- Carbon Look Mines Style Mirrors, Electric very good condition $300

- Carbon N1 holes for front bumper $100

- Nismo Side Clear indicators $60

- Nismo Carbon GTR Wing end caps $100

- Greddy E-01 Boost Controller - $300

- Bride Front Seat Rails Left and Right Type RX suit Ergo II, Brix II, Pros, Xax2 Seats - $300 for both.

- Superior Auto Creative Full Carbon Fibre Dash kit, includes Arm Rest Cover, Gear boot, Handbrake Boot and the whole dash Cost me $1500 selling for $800

- Sniper Carbon Fibre Kick Panels - $80

- Carbon Fibre Gauge Cluster Surround $100

- HKS Type R Intercooler 600x300x100 and piping $700

- Top Secret Style Stainless steel Catch with built in Squirter Bottle - $100

-Sard Air Bleeder Coolant Tank $50

- Billion Alloy Power Steering Tank $150

-Cusco Front and Rear Sway Bars $600

-Tein Monoflex Coilovers $1500

- Cusco Hicas Lock Bar $300

- Ikeya Formula Arms, consist of Front top arms and the 2 Rear Top arms $800

- Apexi Blow off valves x2 $150

- Koyo Alloy Radiator $300

- OS Giken Triple Plate clutch with push converter kit $2000

- R34 N1 Nur 2002 model Engine with Tomei 260x9.15mm Cams and Gears + Belt, Ross Harmonic Balancer, Hi octane Racing Sump Extension, Spool Head drain kit. done approx 25000kms from new $6500

- AP Racing 6pot Front Calipers, with 270x36mm 2 piece fully float rotors, (needs new rotors) $2000

- AP Racing 4pot Rear Calipers with 330x32mm 2 piece rotors, near new $2500

- Jun Style Carbon Fibre Bonnet with Aerolatch bonnet pins $700

Also Sold pending payment, i will also put pics up of the other stuff that needs to be sold.

- Superior Auto Creative Full Carbon Fibre Dash kit, includes Arm Rest Cover, Gear boot, Handbrake Boot and the whole dash Cost me $1500 selling for $800<br style="color: rgb(28, 40, 55); font-size: 13px; line-height: 19px; background-color: rgb(250, 251, 252); "><br style="color: rgb(28, 40, 55); font-size: 13px; line-height: 19px; background-color: rgb(250, 251, 252); ">- Sniper Carbon Fibre Kick Panels - $80<br style="color: rgb(28, 40, 55); font-size: 13px; line-height: 19px; background-color: rgb(250, 251, 252); "><br style="color: rgb(28, 40, 55); font-size: 13px; line-height: 19px; background-color: rgb(250, 251, 252); ">- Carbon Fibre Gauge Cluster Surround $100

- Greddy E-01 Boost Controller - $300

  • 2 weeks later...

SOLD PENDING PAYMENT

- Rays Gram Lights 57F Pro Titanium Lip Wheels with tires 18x10 +20 offset cost me over $4k selling for $2500

-Hankook RS-3 Tyres 285/35 R18 x2 New never used $600

- Carbon Look Mines Style Mirrors, Electric very good condition $300

- Carbon N1 holes for front bumper $100

- Nismo Side Clear indicators $60

- Nismo Carbon GTR Wing end caps $100

- Greddy E-01 Boost Controller - $300

- Bride Front Seat Rails Left and Right Type RX suit Ergo II, Brix II, Pros, Xax2 Seats - $300 for both.

- Superior Auto Creative Full Carbon Fibre Dash kit, includes Arm Rest Cover, Gear boot, Handbrake Boot and the whole dash Cost me $1500 selling for $800

- Sniper Carbon Fibre Kick Panels - $80

- Carbon Fibre Gauge Cluster Surround $100

- HKS Type R Intercooler 600x300x100 and piping $700

- Top Secret Style Stainless steel Catch with built in Squirter Bottle - $100

-Sard Air Bleeder Coolant Tank $50

- Billion Alloy Power Steering Tank $150

-Cusco Front and Rear Sway Bars $600

-Tein Monoflex Coilovers $1500

- Cusco Hicas Lock Bar $300

- Ikeya Formula Arms, consist of Front top arms and the 2 Rear Top arms $800

- Apexi Blow off valves x2 $150

- Koyo Alloy Radiator $300

- OS Giken Triple Plate clutch with push converter kit $2000

- R34 N1 Nur 2002 model Engine with Tomei 260x9.15mm Cams and Gears + Belt, Ross Harmonic Balancer, Hi octane Racing Sump Extension, Spool Head drain kit. done approx 25000kms from new $6500

- AP Racing 6pot Front Calipers, with 270x36mm 2 piece fully float rotors, (needs new rotors) $2000

- AP Racing 4pot Rear Calipers with 330x32mm 2 piece rotors, near new $2500

- Jun Style Carbon Fibre Bonnet with Aerolatch bonnet pins $700

Also have a Works Bell Leather Steering wheel like new $200

227184_10150194932583485_679318484_7042007_6603345_n.jpg

OS Giken R3C Triple Plate Clutch

427427_10150658205713485_679318484_9400520_976888864_n.jpg

423208_10150658205808485_679318484_9400521_858432580_n.jpg

AP Racing 4 Pot Rears with 330mm Rotors

417276_10150658205933485_679318484_9400522_1373183442_n.jpg

421589_10150658206033485_679318484_9400524_830670696_n.jpg

Ikeya Formula Top Front and Rear Arms

431462_10150658206338485_679318484_9400531_964015604_n.jpg

Apexi Bov's

425013_10150658206443485_679318484_9400534_1175655675_n.jpg

AP Racing 6 Pot Fronts with 370mm Rotors

425303_10150658206623485_679318484_9400539_226686061_n.jpg

419566_10150658206773485_679318484_9400542_1909398184_n.jpg

417681_10150658206868485_679318484_9400545_623839241_n.jpg

Mines Style Carbon Look Electric Mirrors

417422_10150658207218485_679318484_9400552_450417610_n.jpg

425082_10150658207338485_679318484_9400554_1154370339_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...