Jump to content
SAU Community

Aftermarket & Stock Parts For Sale, Will Take Low Baller Offers


Recommended Posts

Hey Lads, cleaned out the shed on the weekend and decided I need to unload a few things. I just want to get rid of them so I will take low baller offers but also, don't just be a khunt about it :D

OEM Rb25det Radiator - $50 (make a low baller offer)

6889248365_30cf940d27_z.jpg

OEM series II RB25det ECU - $80 (make a low baller offer) - PENDING SALE

6889289161_59e3166a11_z.jpg

HKS SSQV BOV with spare purple fin and flange to bolt straight onto an RB25det - $80 (make a low baller offer)

6889280029_e6ae950f56_z.jpg

OEM RB25det BOV - $20 (make a low baller offer)

6889285759_0290bd5bf8_z.jpg

Greddy Air diversion panel, will fit S1 and S2 R33 - $40 (make a low baller offer)

6889259469_c9ee18fbea_z.jpg

HKS Super Power filter - $30 (make a low baller offer)

6889277269_7dcb543242_z.jpg

BRAND NEW Cusco offset numberplate mount for R33 GT-R but will pretty much fit anything - $25 (make a low baller offer)

6889283087_482c9f8eba_z.jpg

Turbosmart boost controller T - $20 (make a low baller offer)

6889271167_900c55e60e_z.jpg

2 x OEM Series II RB25det AFM's - $10 each

6889274133_7b8ea4a395_z.jpg

OEM RB25det injectors - $20 (make a low baller offer)

6889268319_ce0fba0bbe_z.jpg

OEM RB25det side mount intercooler - $50 (make a low baller offer)

6889265547_5c637086ac_z.jpg

Kicker Amp - $50 (make a low baller offer)

6889256157_4bf938e202_z.jpg

OEM R33 rear camber arms - $10 (that's pretty low baller anyway)

6889262429_bb00f4d723_z.jpg

Hit me up in this thread or PM me if there is anything you're after!

Edited by Braddd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...