Jump to content
SAU Community

Recommended Posts

Hey guys n gals,

I am trying to identify the make and model of these rims as one of them is missing the centre cap....now i know it can be really hard 2 try and

get these once they go missing but i thought at least if i could id the wheels it might help a little?

Thanks in advance.

post-47639-0-61056300-1329467473_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392089-can-anyone-id-these-rims/
Share on other sites

Ok thanks guys, but just to avoid confusion, are these rims made by fabulous or are they a knock off of a fabulous rim made by someone else? Just can't seem to see that centre cap logo anywhere on the fabulous site or rims?

Thanks again guys

Maybe try burning them?

yeh thanks im not a huge fan of the rims but i dont exactly have the cash to replace a whole set of rims atm seeing as my family just expanded by 2.

my mate's selling a set on the Honda forum

http://www.ozhonda.c...eels-for-sale!!

try to contact him :)

thanks i checked them out they are similar but not the same, they must be the original of what mine are copies of as an earlier poster mentioned.

looks like i might be out of luck but thanks for everyones help.

Yeah they do except they don't have the removable center caps!

Yeah I know, I was just saying :)

I would have suggested Aaron from Import Monster as he deals mainly with wheels.

But he is in Melbourne / VIC... He is a Trader on SAU, PM him and see if he could help you out.

How did you get on? Might be cheaper to knock out the other three and get a cheap set of 4 of any knid.

no good apparently they dont have stock anymore and the wheel is discontinued.

im not sure if we are talking about the exact same part here, im not talking about just the circular part with the logo on it, im talking about the

bit you take off to access the wheel nuts.

such an annoying thing to have just one missing though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...