Jump to content
SAU Community

Recommended Posts

Got these for sale, going in a different direction:

Brand new R33/34 gtr crank

Brand new Rb26 Cp Pistons 86.5mm 9:1

Brand new rb26 Spool Rods with arp fasteners

Will do the lot for $2800, only want to sell as a package at this time.

Great to rebuild the rb26, and awesome for all the rb25 owners who want an awesome bottom end that will handle BIG power.

Pickup in sydney.

The pieces are in boxes and wrapped up, so i'd prefer not to take pics.

But if you wondering, the crank looks like a crank, the pistons like pistons and the rods, well, like rods.

willing to seperate:

Crank - $1150

Pistons - $950

Rods - $500

Or $2500 for the lot

Also have an ATI rb26 1000hp damper brand new in box with water pump pulley - $600

Postage extra

  • 3 weeks later...

bump

will do the whole lot(crank, pistons, rods and balancer) for $3000

In melbourne for the next couple weekends.

Genuine interest only, my time is just as important as yours so please don't stuff me around.

Thanks

bump

will do the whole lot(crank, pistons, rods and balancer) for $3000

In melbourne for the next couple weekends.

Genuine interest only, my time is just as important as yours so please don't stuff me around.

Thanks

Pm sent

  • 3 weeks later...

been away for a few weeks, back now. In melbourne for this weekend then back in sydney, last chance for melb parties.

Will do the lot for $2500 not negotiable

Looking to sell together to make it easier for me as i'm all over the place atm, if it doesnt sell in a few weeks then I'll seperate.

Also have a peterson dry sump tank with warmer and a peterson 4 stage dry sump pump which i will put up soon at a good price.

seperating parts:

R33/34 Gtr crank - $900

Cp Pistons - $750

Spool rods with arp fasteners -$400

r33/34 gtr 1000hp ati balancer - $550

Prices are not negotiable, will still do the lot for $2500.

Again, not negotiable, so don't expect a reply if you ask me for a better deal ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...