Jump to content
SAU Community

Where's The Power Gone?

Country Cruzin

By Country Cruzin,
in Engines & Forced Induction

 Share

Recommended Posts

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

f**k im gona bash mu cat gutless next tune, its a 100cell metal item tho..

Can you try dropping the exhaust first? I have a Venom 100 cell metal cat and would be interested to know if they do significantly reduce power. I believe they don't but hard evidence would be good! Need the cat for a cert but if they cost 50 -60 hp its days are definitely numbered! So far my RB30/25 is only making 220awkw at 15psi. I have been concentrating on fixing the oil control problem but have nearly sorted that and will concentrate on finding the power ( will be going to 18 -21 psi but should be making nearer 300kw at 15 psi :(

SargeRX8 Grand Master

SargeRX8

Posted
Posted

Can you try dropping the exhaust first? I have a Venom 100 cell metal cat and would be interested to know if they do significantly reduce power. I believe they don't but hard evidence would be good!

This too. My car is down about 50rwkw and we suspected the intake. Ive fixed that up but really hope my cat isn't the issue...

SargeRX8 Grand Master

SargeRX8

Posted
Posted

I have had a lot of catalytic converters drop power these days.

Sarge did we drop the exhaust on ur car when tuning?

What cat is Stao running?

We didn't drop the cat, Wolverine on here runs the same cat and makes the predicted power with his turbo as do a few other members. These 5" body venom cats only have 100 cells in a massive body so should be better than most cats. Send me a PM, I'm ready to bring the car back up to you when you are ready(just need to change my AC belt, its squealing and tearing lol). Stao doesn't run a cat...

GTR_JOEY Grand Master

GTR_JOEY

Posted
Posted

My car has lost about 85hp at the wheels, thought the motor was getting sad, but got the leak down test an compression test done both came back fine. tune still seemed good just missing power (from 385 back to bout 300)

wondering if anyone had any ideas wot it could be? thank in advance :thanks:

Was both results on the same dyno?

alot of happy dynos out there haha

TiTAN Grand Master

TiTAN

Posted
Posted

Can you try dropping the exhaust first? I have a Venom 100 cell metal cat and would be interested to know if they do significantly reduce power.

i have one running just shy of 400kw

ERD have had people making 400+ using them.

http://www.skylinesaustralia.com/forums/topic/379675-when-does-a-5-cat-become-a-restriction/

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

i have one running just shy of 400kw

ERD have had people making 400+ using them.

http://www.skylinesaustralia.com/forums/topic/379675-when-does-a-5-cat-become-a-restriction/

Have u tried a run without it to see the difference?

Dajae Community Regular

Dajae

Posted
Posted

Does anyone else picture a furry little cat clinging onto the bottm of the car for dear-life? Lol.

I used to have a nismo cat. Made 252rwkw. Dropped it and put in a de-cat pipe.. Made ~262rwkw. Silly mistake.. Should have kept it on. The power gain barely (if at all) justifies the legal issues.

  • 3 months later...
SiR_RB Grand Master

SiR_RB

Posted
Posted

I Had a 3" metalcat, tuned with it...then gutted it, ran it on the Dyno and we could add more timing without it knocking

Have since added big mofo front pipes and 3.5" decat - 3.5" cat back

Dead cats are good cats :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...