Jump to content
SAU Community

Recommended Posts

OK, So ive been in Japan for years with my R33 and its time to relocate back to Aus. Im going to bring the car back as a Personal Import but I can find little info on the net about doing this. Therefore I was hoping there were people out there with recent experience (as rules/info changes fast) who can help explain to me how and what to do. Go as simple and thorough as you like, its the only way I'll learn.

So I was hoping people could elaborate on things like.

-Process of taking my car from sitting happily in my parking space in Tokyo to ending up in a compliance garage in Adelaide. Step by step if you can.

- Costs of doing so, a breakdown of actual or expected costs would be good

- Your experience or advice : what you did and or would do differently

- What needs to be changed for compliance, remembering this is a personal import.

- What a compliance workshop will do, and what they will charge and what I need to do

- Info on shipping both points regarding in japan and in Aus (if you rented the whole container I wanna know abou that too)

BIG THANKS in advance, you will make my life, and that of anyone using this info in th future much easier : )

Link to comment
https://www.sau.com.au/forums/topic/393165-personal-car-import-info-needed/
Share on other sites

Hey mate.

Your best bet would be to email Kristian @ Iron Chef Imports. He is a member of this forum as well and he will be able to provide you with all the information you need in regards to bringing over your car as a Personal Import.

Yes you need a customs broker, unless you are happy doing all of the paperwork yourself, which you won't be. Compliance workshop simply has the car delivered to them, do their crap and then you either pick it up or it is sent to you.

Seriously though, speak with Iron Chef or Prestige motorsport or one of the others. They will explain every little detail to you and do their best to save you money. They get paid the same amount no matter what it ends up costing you.

Umm, Sorry Iron Chef, never recieved any message, although I will be checking your new site for this soon.

Also, So a customs broker will deal with paperwork on the Aus side of things, right? What kind of paperwork. And do they organize sending the car to the compliance workshops address.

Also, what would be an expected charge for a customs broker?

Although I probably dont wanna do it all myself, I certainly will have time on both ends...

  • 2 weeks later...
Has anyone picked the car up themselves from customs and trailered it to their chosen workshop? Any problems or issues from this?

Dont bother trailering it. Just get a temporary road permit from your state road authority. Allows you to drive the car around to the workshop and back from the docks. A cover note from an insurance company is also a good idea.

Heres another question on the off chance that anyone reads this thread again, What taxes, if any, need to be paid on a personal import? GTS? Import duty? etc

Heaps! You will be slogged for customs duty of 10 percent of the value of your car (they will have a valuer make an estimate of current value), and then another 10 percent in gst ontop of the customs fees and shipping fee. Also remember you will be taxed again when you get around to registering the car. Then there is also customs broker fees which should be around 500 dollars at either end.

Ive done two personal imports btw.

Edited by BigWillieStyles
  • 3 weeks later...

Hey, I'm a bit late to the convo.

I imported my car from NZ as a personal import myself with the use of a customs broker here in Perth.

A couple of things to consider:

Have you owned the vehicle for 12 months, has it been registered in your name for 12 months?

Do you have original proof of purchase details in your name?

1 - apply for vehicle import approval, cost was around $56. If you are already in Australia you have 6 months to get this approval from the date you arrived in the country. http://www.infrastru...tion_201107.pdf

2 - contact a shipping company and organise delivery of a container. My shipping from NZ was $3461, they delivered the container to my house where my family loaded the container (I also had some furniture and personal effects sent over).

3 - organise shipping insurance - the shipping company put me onto an agency who does maritime insurance, cost was $289

4 - organise a customs broker - I used Universal Customs Brokers in Perth, cost was $3496

5 - get a permit to pick up the car from the quarantine company when they're done with it - in WA these are $21

6 - take it over the pits for $90, let it fail (if need be), get a defect list, fix defects and then apply for Personal Import Plate from Niddrie $86 (the info about this was supplied with the import approval from step 1)

7 - register your car

Heres some info about taxes from an email I got: Anyone can PM me if they want more info on this process.

Vehicles will normally attract an import duty rate of 5%, the duty will be charged on the value of the vehicle in Australia. This value can be obtained by contacting a motor vehicle valuer in the state you are importing the goods to.

The vehicle would also attract a Goods and Services Tax (GST) rate of 10%. The GST is paid on the combined value of:

- The Australian value of the vehicle

- The duty paid on the vehicle

- The cost of freight and insurance

The vehicle may also attract Luxury Car Tax (LCT) of 33% of the value of the vehicle in excess of $57,466. The value of the vehicle used is the combined total of:

- The Australian value of the vehicle

- The duty paid on the vehicle

- The cost of freight and insurance

- The amount of GST paid

Because of the various duty rates applicable, and the existence of two valuation regimes dependant on whether the car was purchased before or on or after 2 March 1998, information describing the process involved and the methods to be used in calculating any duty and tax liability is available on the Customs and Border Protection website at

http://www.customs.g...te/page4371.asp

The vehicle also needs to be steam cleaned. This is administered by the Australian Quarantine and Inspection Service (AQIS). Visit their website at www.aqis.gov.au for more information. ***EDIT (TBH I didn't get this done at all, I just got the interior cleaned proffessionally and then my dad cleaned the outside)***

Edited by mz.qiksky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...