Jump to content
SAU Community

Personal Car Import Info Needed

ausdrift
 Share

Recommended Posts

ausdrift Experienced

ausdrift

Posted
Posted

OK, So ive been in Japan for years with my R33 and its time to relocate back to Aus. Im going to bring the car back as a Personal Import but I can find little info on the net about doing this. Therefore I was hoping there were people out there with recent experience (as rules/info changes fast) who can help explain to me how and what to do. Go as simple and thorough as you like, its the only way I'll learn.

So I was hoping people could elaborate on things like.

-Process of taking my car from sitting happily in my parking space in Tokyo to ending up in a compliance garage in Adelaide. Step by step if you can.

- Costs of doing so, a breakdown of actual or expected costs would be good

- Your experience or advice : what you did and or would do differently

- What needs to be changed for compliance, remembering this is a personal import.

- What a compliance workshop will do, and what they will charge and what I need to do

- Info on shipping both points regarding in japan and in Aus (if you rented the whole container I wanna know abou that too)

BIG THANKS in advance, you will make my life, and that of anyone using this info in th future much easier : )

Link to comment
https://www.sau.com.au/forums/topic/393165-personal-car-import-info-needed/
Share on other sites
JDM34 Collaborator

JDM34

Posted
Posted

Hey mate.

Your best bet would be to email Kristian @ Iron Chef Imports. He is a member of this forum as well and he will be able to provide you with all the information you need in regards to bringing over your car as a Personal Import.

Alkatraz Rising Star

Alkatraz

Posted
Posted

Yes you need a customs broker, unless you are happy doing all of the paperwork yourself, which you won't be. Compliance workshop simply has the car delivered to them, do their crap and then you either pick it up or it is sent to you.

Seriously though, speak with Iron Chef or Prestige motorsport or one of the others. They will explain every little detail to you and do their best to save you money. They get paid the same amount no matter what it ends up costing you.

ausdrift Experienced

ausdrift

Posted
  • Author
Posted

Umm, Sorry Iron Chef, never recieved any message, although I will be checking your new site for this soon.

Also, So a customs broker will deal with paperwork on the Aus side of things, right? What kind of paperwork. And do they organize sending the car to the compliance workshops address.

Also, what would be an expected charge for a customs broker?

Although I probably dont wanna do it all myself, I certainly will have time on both ends...

  • 2 weeks later...
BigWillieStyles Enthusiast

BigWillieStyles

Posted
Posted (edited)
Has anyone picked the car up themselves from customs and trailered it to their chosen workshop? Any problems or issues from this?

Dont bother trailering it. Just get a temporary road permit from your state road authority. Allows you to drive the car around to the workshop and back from the docks. A cover note from an insurance company is also a good idea.

Heres another question on the off chance that anyone reads this thread again, What taxes, if any, need to be paid on a personal import? GTS? Import duty? etc

Heaps! You will be slogged for customs duty of 10 percent of the value of your car (they will have a valuer make an estimate of current value), and then another 10 percent in gst ontop of the customs fees and shipping fee. Also remember you will be taxed again when you get around to registering the car. Then there is also customs broker fees which should be around 500 dollars at either end.

Ive done two personal imports btw.

Edited by BigWillieStyles
  • 3 weeks later...
mz.qiksky Explorer

mz.qiksky

Posted
Posted (edited)

Hey, I'm a bit late to the convo.

I imported my car from NZ as a personal import myself with the use of a customs broker here in Perth.

A couple of things to consider:

Have you owned the vehicle for 12 months, has it been registered in your name for 12 months?

Do you have original proof of purchase details in your name?

1 - apply for vehicle import approval, cost was around $56. If you are already in Australia you have 6 months to get this approval from the date you arrived in the country. http://www.infrastru...tion_201107.pdf

2 - contact a shipping company and organise delivery of a container. My shipping from NZ was $3461, they delivered the container to my house where my family loaded the container (I also had some furniture and personal effects sent over).

3 - organise shipping insurance - the shipping company put me onto an agency who does maritime insurance, cost was $289

4 - organise a customs broker - I used Universal Customs Brokers in Perth, cost was $3496

5 - get a permit to pick up the car from the quarantine company when they're done with it - in WA these are $21

6 - take it over the pits for $90, let it fail (if need be), get a defect list, fix defects and then apply for Personal Import Plate from Niddrie $86 (the info about this was supplied with the import approval from step 1)

7 - register your car

Heres some info about taxes from an email I got: Anyone can PM me if they want more info on this process.

Vehicles will normally attract an import duty rate of 5%, the duty will be charged on the value of the vehicle in Australia. This value can be obtained by contacting a motor vehicle valuer in the state you are importing the goods to.

The vehicle would also attract a Goods and Services Tax (GST) rate of 10%. The GST is paid on the combined value of:

- The Australian value of the vehicle

- The duty paid on the vehicle

- The cost of freight and insurance

The vehicle may also attract Luxury Car Tax (LCT) of 33% of the value of the vehicle in excess of $57,466. The value of the vehicle used is the combined total of:

- The Australian value of the vehicle

- The duty paid on the vehicle

- The cost of freight and insurance

- The amount of GST paid

Because of the various duty rates applicable, and the existence of two valuation regimes dependant on whether the car was purchased before or on or after 2 March 1998, information describing the process involved and the methods to be used in calculating any duty and tax liability is available on the Customs and Border Protection website at

http://www.customs.g...te/page4371.asp

The vehicle also needs to be steam cleaned. This is administered by the Australian Quarantine and Inspection Service (AQIS). Visit their website at www.aqis.gov.au for more information. ***EDIT (TBH I didn't get this done at all, I just got the interior cleaned proffessionally and then my dad cleaned the outside)***

Edited by mz.qiksky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...