Jump to content
SAU Community

Recommended Posts

Hey guys,

Just bought my first skyline yesterday and am having a little dramas with something I didnt notice on the test drive.

When driving normaly it boosts fine and everything seems ok, but when you really jump on it the thing hesitates a bit and then goes and then hesitates and keeps doing it.

Im thinking it might be the coil packs, does this sound about right? Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/393964-r33-gtst-cutting-out-under-load/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Yeh, could be missfiring - common causes are failing coilpacks and old spark plugs.

How many km's? regularly serviced/looked after? what mods?

Spark plugs are cheap and easy fix.

Coilpacks are 500-600+ for splitfires which are proven great replacements

Yellow jackets are cheaper alternatives

in the DIY section here I also believe there might be ways to repair the coilpacks if they have cracked and the spark is getting out other ways then down the coil, but obviously not as fullproof as brand new...

Other things could be intercooler piping is popping off slightly when under full bost - have to go around checking all the joins/clamps.

The car has 150ks on it, it's got a front mount, pod filter and a few other things...

Guy said it's running 8 psi but there is only the factory gauge to check that...

Had new plugs put in only a few thousand k's ago

I just got some yellow jackets so I will try those and see how it goes

Not having the best day, just got the coils and on the way back got stuck on the m5 for 2 hours after someone had a massive accident, finally got out of there an the car starts really cutting out and then just splutters until it died on the side of the road.. The fuel gauges is on 1/4 so im hoping its just the gauge is wrong and I'm out of fuel.. It did feel pretty similar to what was happening before but just heaps worse, could it be a fuel problem and not spark?

Good news! It actually did run out of fuel so it wad just the gauge that was out, and i think the coil packs fixed the problem! It's a bit hard to tell with wet roads..as soon as I jump on it it's breaking traction but I can't feel or hear any cutting out... But man...this A-LSD sucks ass....keeps single spinning, gonna have to do something about that..

When people put aftermarket fuel pumps in (Walbro, Bosch etc), those pumps tend to not like the tank being down to 1/4. This is to do with how the pump is physically mounted inside the tank, can explain why the car "ran out of fuel" with 1/4 left (on the assumption the gauge is 100% correct).

Yeah and the guy before me did put in an aftermarket fuel pump recently so that must be it.

I think he must have tried to fix the problem with plugs then pump and he had also tried to fix the factory coils... Glad I got it with the new coils first go...and I got them slightly used for $250 already on another set of rails...cheering

Also, the guy before me took the cover that goes over the coils off, he said it lets them cool down a bit more. Is this really neccesarry or can I just put it back on....looks kinda ugly without it.

I bought yellow jackets, changed them and my car still does it....why me....makes me think of how good the car would go if it didn't do it...I wish I knew what the problem was

It is a rich misfire from running more boost on a stock tune. Turn the boost back to stock and it will stop doing it, if you have an exhaust, fmic etc then you need a remap nothing else will fix it.

If the coils are on their way out replacing them can fix it, but often you need to lean out the mixture as well, it can drop to 9:1 on a stock tune if you run ~12psi. At least that was as low as the wideband went.

Edited by Rolls

ive had it with this misfiring crap pisses me off lol....i hate yellow jackets i reckon its them

Read my post. The coilpacks are fine, your car is running a stock tune and hitting R&R, this coupled with bad spark causes a misfire, sometimes new coils make the spark strong enough it "Fixes" it, but often it does not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...