Jump to content
SAU Community

Recommended Posts

1: enkei rp01 17 x 9 +22

just had them resprayed silver (matched to the original colour). There was some pitting you can see through the paint that they didn't fill in. They look nice from a couple of metres away.

$900 + $50 postage Australia wide.

enkei rims

2: Garret turbos for a GTR. 2860 -7 I believe.

Just rebuilt by Precision Turbos. Both have brand new bearings and the exhaust housings have been ceramic coated in black. As good as new.

Part numbers from the cores:

HH 0110J

14411-AA403

707160-7

Part number from actuators:

430819-369

08223

35367

$1600 + $50 postage (includes insurance)

turbos

3: R32 GTR Fibreglass front diffuser

The one in the link is the one I bought

R32 GTR diffuser

$220 + $25 postage

4: Speedline 17 x 9 +25

Tyres are dead but may pass rego. I lost one centre cap on the road :( Comes with the centre cap tool too. :)

usual small gutter rash

$400 + $50 postage

speedline

5: 4" stainless exhaust

Front pipes to back

only used for a short time by previous owner, catco cats on each leg of the front pipe. Will need to be welded back together. I cut it up to squeeze it in my car.

$400 can be posted but unsure of postage costs.

exhaust

6: r32 GTR side skirts 2 pairs

both need straightening and one set needs painting, the other needs a GOOD polish

just take them.

7: RB26 block with rods pistons and crank (pistons and rods removed from block)

no cracks, all is in good nick.

$200

8: R32 GTR Tomei dumps, the older fabricated ones BRAND NEW AND UNUSED

ceramic coated black, will accept only the R32 GTR 02 sensors. provisions for exhaust temp sensors on both pipes

$600 + $15 postage

tomei dumps

9: used aftermarket rb26 manifolds not sure on brand, no cracks, provisions for heat shields

ceramic coated black

$200 + $20 postage

manifolds

10: used rb26 heat shields ceramic coated

$80 + $15 postage

heat shields

11: R33 GTR aircon compressor sold as is

$50

air con compressor

12: R33 GTR standard clutch, flywheel and pressure plate USED

$50

clutch

13: N1 water pump used

$50 + $12 postage

14: N1 oil pump used, not cracked

$50 + $12 postage

15: ex BSM R32 GTR sump, with baffles and extended pan

needs a donor sump for the diff parts

$850 + postage

sump

16: standard r32 gtr sump good condition

$200

17: ex BSM R32 GTR Quaife front diff centre used but in good condition

$1200

quaife

18: tomei pon cam replicas bought from dirtgarage (who used them for a short time) then not used by me.

260in 260ex 9.15mm lift

$400 + $20 postage

19: R32 GTR fibreglass N1 bonnet lip painted in white NEW

$80

lip

20: R32 GTR fibreglass N1 boot lip painted in white NEW

$160

lip

21: R32 GTR Trust style fibreglass rear pods painted in white NEW

$160

pods

Will post at buyers expense. Pick up is available from Quakers Hill.

Cheers

Josh

Link to comment
https://www.sau.com.au/forums/topic/394428-skyline-parts/
Share on other sites

  • 2 weeks later...

1: enkei rp01 17 x 9 +22

just had them resprayed silver (matched to the original colour). There was some pitting you can see through the paint that they didn't fill in. They look nice from a couple of metres away.

$900 + $50 postage Australia wide.

enkei rims

2: Garret turbos for a GTR. 2860 -7 I believe.

Just rebuilt by Precision Turbos. Both have brand new bearings and the exhaust housings have been ceramic coated in black. As good as new.

Part numbers from the cores:

HH 0110J

14411-AA403

707160-7

Part number from actuators:

430819-369

08223

35367

$1600 + $50 postage (includes insurance)

turbos

3: R32 GTR Fibreglass front diffuser

The one in the link is the one I bought

R32 GTR diffuser

$220 + $25 postage

4: Speedline 17 x 9 +25

Tyres are dead but may pass rego. I lost one centre cap on the road :( Comes with the centre cap tool too. :)

usual small gutter rash

$400 + $50 postage

speedline

6: r32 GTR side skirts 1 pair

both need straightening and one set needs painting, the other needs a GOOD polish

just take them.

7: RB26 standard rods pistons in excellent condition

no cracks, all is in good nick.

$100

9: used aftermarket rb26 manifolds not sure on brand, no cracks, provisions for heat shields

ceramic coated black

$200 + $20 postage

manifolds

11: R33 GTR aircon compressor sold as is

$50

air con compressor

12: R33 GTR standard clutch, flywheel and pressure plate USED

$50

clutch

13: N1 water pump used

$50 + $12 postage

15: ex BSM R32 GTR sump, with baffles and extended pan

needs a donor sump for the diff parts

$850 + postage

sump

16: standard r32 gtr sump good condition

$200

18: tomei pon cam replicas bought from dirtgarage (who used them for a short time) then not used by me.

260in 260ex 9.15mm lift

$400 + $20 postage

19: R32 GTR fibreglass N1 bonnet lip painted in white NEW

$80

lip

20: R32 GTR fibreglass N1 boot lip painted in white NEW

$160

lip

21: R32 GTR Trust style fibreglass rear pods painted in white NEW

$160

pods

Will post at buyers expense. Pick up is available from Quakers Hill.

Cheers

Josh

Items updated

Link to comment
https://www.sau.com.au/forums/topic/394428-skyline-parts/#findComment-6303499
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

1: enkei rp01 17 x 9 +22

just had them resprayed silver (matched to the original colour). There was some pitting you can see through the paint that they didn't fill in. They look nice from a couple of metres away.

$900 + $50 postage Australia wide.

enkei rims

2: Garret turbos for a GTR. 2860 -7

Just rebuilt by Precision Turbos. Both have brand new bearings and the exhaust housings have been ceramic coated in black. As good as new.

Part numbers from the cores:

HH 0110J

14411-AA403

707160-7

Part number from actuators:

430819-369

08223

35367

$1600 + $50 postage (includes insurance)

turbos

3: R32 GTR Fibreglass front diffuser

The one in the link is the one I bought

R32 GTR diffuser

$220 + $25 postage

7: RB26 standard rods pistons in excellent condition

no cracks, all is in good nick.

$100

9: used aftermarket rb26 manifolds not sure on brand, no cracks, provisions for heat shields

ceramic coated black

$200 + $20 postage

manifolds

11: R33 GTR aircon compressor sold as is

$50

air con compressor

12: R33 GTR standard clutch, flywheel and pressure plate USED

$50

clutch

13: N1 water pump used

$50 + $12 postage

15: ex BSM R32 GTR sump, with baffles and extended pan

needs a donor sump for the diff parts

$850 + postage

sump

16: standard r32 gtr sump good condition

$200

18: tomei pon cam replicas bought from dirtgarage (who used them for a short time) then not used by me.

260in 260ex 9.15mm lift

$400 + $20 postage

19: R32 GTR fibreglass N1 bonnet lip painted in white NEW

$80

lip

20: R32 GTR fibreglass N1 boot lip painted in white NEW

$160

lip

21: R32 GTR Trust style fibreglass rear pods painted in white NEW

$160

pods

Will post at buyers expense. Pick up is available from Quakers Hill.

Cheers

Josh

Link to comment
https://www.sau.com.au/forums/topic/394428-skyline-parts/#findComment-6344103
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...