Jump to content
SAU Community

Recommended Posts

Just read from start to finish!

Hope your next tune isn't a disappointment like the others.

My car got finished tonight with the SS1PU install.

Took me over a week to fit everything right and make sure its all good.

Tomorrow I am topping her up with some much needed oil + coolant and on Sunday I will be at DVS's workshop tuning

I look forward to seeing the end result of your fuel line setup, it will give me some guidance on mine.

Where did u end up sourcing the braided line and speed low fitting?

is it Teflon inner braided line?

I look forward to seeing the end result of your fuel line setup, it will give me some guidance on mine.

Where did u end up sourcing the braided line and speed low fitting?

is it Teflon inner braided line?

Yes I remember you asked about it in the other thread, I was going to notify you when I was sure it all worked. Got everything from speedflowdirect.com, by far the cheapest prices I have found on Speedflow stuff.

Unfortunately my excitement from earlier today has petered out into yet more frustration and disappointment. The f**king fittings don't fit the hose. As in, they fit... But they aren't tight. If I pull on them hard enough I can pull the fitting straight off the end. Not good. Did a bit of research on the Speedflow website, and I think the issue is that the 100 series fittings I bought are not compatible with the 200 series braided hose that I got. Which is f**king annoying because I emailed them and asked them what I needed and they gave me the list, so for it to now not work is really god damn frustrating.

I'm confused though because 200 series hose is the only hose you can use for unleaded fuel line, and 100 series fittings are the red and blue anodized fittings. Obviously there are cars everywhere sporting the 100 series fittings for their fuel lines, so what fkn hose are they using or what am I missing? So damn annoyed right now, had hoped the car would be back together this weekend and now I'm back to square one with no idea where to start. Not happy.

ahhh yeah 200 series hose isnt compatible with 100 series fittings...

the 200 series fittings are made to specifically hold the teflon, 100 is made to hold the rubber core...

bugger, surely they will exchange that...

You can use the 100 series hose they just dont guarantee that it wont give out a vapour smell.

I can pull the fitting off the end of the line with just my hands. There's no way I'll be using that on my car.

ahhh yeah 200 series hose isnt compatible with 100 series fittings...

the 200 series fittings are made to specifically hold the teflon, 100 is made to hold the rubber core...

bugger, surely they will exchange that...

Means weeks of waiting.

I don't want the 200 series fittings either, they are hideous. They also don't make the ones I need. There is no 180 degree fitting in the 200 series, so it won't fit, I need the 180 degree fitting.

yeah I noticed there is no 180 degree series 200 fitting as well...

the black and blue isnt that bad, I just see it as specialised fuel fitting, function over form is always best for reliability and from a 'do it right first time' point of view...

and you cant use the series 100 hose for E85 either...

what are you going to do...?

yeah I noticed there is no 180 degree series 200 fitting as well...

the black and blue isnt that bad, I just see it as specialised fuel fitting, function over form is always best for reliability and from a 'do it right first time' point of view...

and you cant use the series 100 hose for E85 either...

what are you going to do...?

Well yes, but had I known I couldn't use these fittings I would have just bought some EFI hose from my local Hose Co. for $7 a meter, I went with the $30-a-meter-braided hose (which I've now cut so won't be getting my money back for) with these fittings because I thought it would really finish off the HKS rail and Plazmaman.

No idea what I'm going to do. It's pretty much $200 wasted, I can't use any of it. I can't even use the braided line for anything else now because I've already cut it. Honestly don't know what I'm going to do, I guess I have to try just sending the fittings back and getting them replaced with 400 series, but that puts the whole project on the back-burners now.

suck... I cant believe they recommended those products to go together for you...

you know speedflow australia are pretty helpful guys and know thier distributors, and if youve purchased products off their recommendation surely the distributor can compensate or replace them.

they have sold you incompatible products...

suck... I cant believe they recommended those products to go together for you...

you know speedflow australia are pretty helpful guys and know thier distributors, and if youve purchased products off their recommendation surely the distributor can compensate or replace them.

they have sold you incompatible products...

Yeh I just called them up and they seemed very helpful, but essentially said there is nothing they can do. They are happy to exchange the fittings, but I have to pay for postage which is $15 each way and it will take a few weeks.I may as well just go and get some cheap Eaton fittings locally and save paying for postage and weeks of downtime. This is a right pain in the ass seeing as these fittings are what I am waiting on to get the car back together.

My other option is to head down to Go Gear, my local Speedflow supplier. They've got the fittings I need in stock, and apparently there is a 200 series -6 180 degree hose end. Just means I will have paid $105 for these two fittings. All because people can't do their god damn job.

Edited by Hanaldo

I can pull the fitting off the end of the line with just my hands. There's no way I'll be using that on my car.

Means weeks of waiting.

I don't want the 200 series fittings either, they are hideous. They also don't make the ones I need. There is no 180 degree fitting in the 200 series, so it won't fit, I need the 180 degree fitting.

I didnt mean you can use the fittings, you cant use 100 fitting on 200hose they are different, what I meant was you can use 100 series hose instead of 200 the only reason it is not recomended because it lets out petrol vapour if the hoses are in cabin.

I didnt mean you can use the fittings, you cant use 100 fitting on 200hose they are different, what I meant was you can use 100 series hose instead of 200 the only reason it is not recomended because it lets out petrol vapour if the hoses are in cabin.

Fair enough, misunderstood you.

Petrol vapour is flammable... Doesn't sound like a quality idea to me?

Fair enough, misunderstood you.

Petrol vapour is flammable... Doesn't sound like a quality idea to me?

Well your normal standard rubber hoses that are used in cars are the same they let out a smell aswell, I guess vapour is not the best word more let off a smell. Its strange I checked on the website and previously it used to say 100 200 and the normal rubber hoses can be used with fuel but only the 200 if its in cabin but now it just says not suitable for fuel would be interesting to see what has changed.

since they fked up, surely they can pay postage for you to send it back to get it exchanged and sent back to you at no cost??!!

if they dont, thats pretty poor customer service.

They will pay for standard postage. I need these parts so I want express postage, I would have to pay for that. Even with express postage I'm looking at 2 weeks of waiting. I could have the car together and tuned in that time. I think I'm just going to bite the bullet and head down to my local supplier, I can't wait for postage. I mean I could have everything back together tonight, or I could sit on my hands for a couple of weeks. Anyone wanna buy some 100 series fittings? confused.gif

Fark! What a dilemma!!! I left this thread thinking you would be up and running when i got back.... This sux man! :down:

Well even without this I wouldn't be up and running yet because the intercooler piping looks like it's going to be a hell of a job. But it is annoying. I've decided I'm not waiting for postage, I'm heading down to Go Gear later so I'll get it all plumbed up tonight. Injectors should be online by tonight as well, I just haven't been in the mood to put the new pins on yet. So it will be mostly back together, just the catch can and piping to sort out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...