Jump to content
SAU Community

Recommended Posts

a few guys from newy arent so keen to drive down to richmond & thinking of just heading out to mount thorley, and following every1 back to pokolbin.

Miss all the good parts of putty road then dont you?..

  • Replies 171
  • Created
  • Last Reply

Top Posters In This Topic

How much will that shorten the trip?? Wouldn't mind cutting it bak if it can be helped, not to keen on spending 100 bucks on petrol to have an empty tank on Monday haha

it will cut it down to 190km, from about 420km.... joining the actual cruise for about 40kms..

a few guys from newy arent so keen to drive down to richmond & thinking of just heading out to mount thorley, and following every1 back to pokolbin.

If you are thinking along those lines maybe a better option is to head south along the Putty rd till you get the the old servo on the hill (can't remember how far down but not quite halfway from memory ) and wait for the cars to come through.

Still get some decent miles on the putty road just a drive down and turn around and come back again.

If you are thinking along those lines maybe a better option is to head south along the Putty rd till you get the the old servo on the hill (can't remember how far down but not quite halfway from memory )

i stopped at this station one day, started to take a couple photo's & some old hillbilly came out yelling at me to get lost.

i lol'd, then remembered these people have guns. so i left.

i stopped at this station one day, started to take a couple photo's & some old hillbilly came out yelling at me to get lost.

i lol'd, then remembered these people have guns. so i left.

Yeah it can be like that now that I think about it

I only stopped long enough to use the loo and kept going, was doing a shed delivery somewhere down that way

Quick question for the Sydney people I wanna know where is the best place to stop for fuel once down there

Plan to leave Newy with a full tank and top up somewhere in Sydney on the way

Any BP's with 98 in Windsor or along Windsor road?

windsor road, and pitt town rd.

BP at the lights, will confirm if they have 98 tomorrow for you.

if not, theres a 7/11 just before the bp, 99% sure they have 98, or as stated, the shell next to the raaf base.

nah wondering about a servo in the hunter valley, not near the meetup in the morning

weather looks to be sunny and 26 degrees yiewwww

Post was in relation to the one 2 above....

No idea about the other end, first time doing putty.

where abouts is the servo near the crowne plaza hunter valley?>

About 5 mins down the road towards Cessnock

Easy to find just drive to Cessnock till you see the shell

Thanks for the info on Sydney side

Edited by m.j.h
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...