Jump to content
SAU Community

Recommended Posts

i did a search on this a couple of months ago and found most guys in here to be using redline.

i did some reading and research on my own as well, looking @ neutral websites and see what they have to say abt redline and its was always positive.

i went ahead with it and no regrets whatsoever :D

expensive but well worth it. its gunna stay in your diff for 2 years so might as well get something top of the line.

no guide yet, so take some photos when you do it :P

Theres just the usual filler on the top at the rear of the diff, and a plug on the bottom. make sure you can open the filler plug before you let all the oil out....

takes about 1.5litres of 80w90 oil.

no guide yet, so take some photos when you do it :D

Theres just the usual filler on the top at the rear of the diff, and a plug on the bottom. make sure you can open the filler plug before you let all the oil out....

takes about 1.5litres of 80w90 oil.

The filler is on the top and the drain is on the bottom...

But you don't want to drain all the oil only to find that you can't open the filler...

Yup strutto is correct, it doesnt matter what fluid you use, because a viscous coupling unit is not affected by the oil so you can just use any GL5 rated oil as you please. Mechanical/clutch style diffs in commodores etc are sensitive to the fluid's coefficient of friction so you must use a specified differential oil in those...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...