Jump to content
SAU Community

Recommended Posts

There are several courier companies. Some here will vouch for one; some others for another - but I get your question.

It can be significantly cheaper by sending depot to depot rather than door to door.

e-Go has been recommended by some of late. For me though, it took weeks - not days - to get suspension parts from Perth to Sydney.

Northline is a company that Iron Chef Imports and I have used with items shrunk wrapped onto a pallet. > depot to depot

Link to comment
https://www.sau.com.au/forums/topic/395638-shipping/#findComment-6286722
Share on other sites

I have used e-Go (Hunter Valley Express) from Vic to Qld for a set of wheels last year before Christmas.

They are a bit odd at the Vic end because it is another company that handles their presence here. They said they were getting their processes in place / keeping better records for the e-Go stuff.

I didn't have a problem and the wheels were there in a few days at a great price.

Link to comment
https://www.sau.com.au/forums/topic/395638-shipping/#findComment-6286857
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...