Jump to content
SAU Community

Recommended Posts

Hi Guys,

As many of you would know, part of the ADR Compliancing is to remove the foglight and disable the foglight switch on the dash.

Has anyone ever bothered to get them working again?

If so how hard or easy is it to recommission?

Thanks,

Bob.

Link to comment
https://www.sau.com.au/forums/topic/396511-r32-gt-r-foglights/
Share on other sites

Unlikely that they bothered with seperate wiring....so if you pull the adm dash is there still plugs in place?

Does the ADM have the switches or a blank.

Hi Duncan,

You may not be aware but I bought a JDM a few weeks ago and I'm restoring it at the moment.

Post 58 here - http://www.skylinesa...2k/page__st__40

I wouldn't touch the ADM but I'm keen to get the fogs working on this new car.

Cheers,

Bob.

Ahh OK, now I understand. Makes more sense too

Well, I've seen it done 3 ways:

Unplug the switch in the dash

Unplug the wiring to the globe

Cut the power wire for the light.

Depending on the original compliancer's level of laziness it could be any. Certainly there is no "official" way to disable them, they just can't work after compliance.

I would start with the engine bay, simply because it is easiest. There will be 2 sets of wires going to the headlight, one for the main, one for the fog lights. Most likely the second is unplugged or cut.

Sorry I don't have my car handy here to check, it is in original JDM spec as it was never complied

Ahh OK, now I understand. Makes more sense too

Well, I've seen it done 3 ways:

Unplug the switch in the dash

Unplug the wiring to the globe

Cut the power wire for the light.

Depending on the original compliancer's level of laziness it could be any. Certainly there is no "official" way to disable them, they just can't work after compliance.

I would start with the engine bay, simply because it is easiest. There will be 2 sets of wires going to the headlight, one for the main, one for the fog lights. Most likely the second is unplugged or cut.

Sorry I don't have my car handy here to check, it is in original JDM spec as it was never complied

Thanks mate, I appreciate the feedback.

I can add it to the 45,671,234 other things I want to do to it! :banana: :banana: :banana: :banana:

OK..... now I'm confused....................

The two outer lights are my parking lights, the centre projector style lights are the normal night lights, and the two inner lights are the high beams.

So...... which are the fog lights?

Thanks,

Bob. :blink: :blink: :blink: :blink: :blink:

Not many have them, but here's what the factory option ones look like;

2e2fqy1.jpg

This picture shows where they are mounted (although the lights in the picture are not the stock ones)

CIMG0280.jpg

Ahhhhhhh the penny has just dropped!

I was looking at a car on Carpoint that must have had the OEM's fitted and I thought to myself how ugly they were! :rofl: :rofl: :rofl:

I didn't realise they were the originals.

All's good.

Cheers guys.......

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...