Jump to content
SAU Community

Recommended Posts

Its a snake thats living under the plenum.

Send an Owl to Harry Potter and ask him to translate, he can speak Parseltongue.

Have you tried increasing the revs a bit to see if it does it above idle? Change the hose on the FPR?

Maybe post a video. Cars make all sorts of noises and people describe them differently so its hard to E-Mechanic it. But my stock injectors and my Nismo ones definitely dont hiss at all at idle.

Link to comment
https://www.sau.com.au/forums/topic/396689-hissing/#findComment-6300192
Share on other sites

There is a PCV hose that is plumbed into the rocker cover near the front of the plenum. It is connected via a push-in one-way valve.

Mine sometimes has a hiss from there- maybe have a look at that? Might have dislodged it/damaged it when replacing injectors.

If not, shoot it with a 12 gauge but leave one in the pipe in case the snakes are hunting in pairs.

Link to comment
https://www.sau.com.au/forums/topic/396689-hissing/#findComment-6300580
Share on other sites

I checked the lines and cant find the point of the hissing.

Might rig up some ear muffs with a hose on the end to pinpoint it.

Hermione rocked my world last night I just sent her to your place via platform 9 and 3 quarters.

Ohh and Game Of Thrones is an epic story of knights & dragons etc.

Recommend it heavily

Link to comment
https://www.sau.com.au/forums/topic/396689-hissing/#findComment-6301009
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...