Jump to content
SAU Community

Recommended Posts

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/
Share on other sites

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Yes you certainly are confused.

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300690
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

Then take weight into account etc??

Lol can't afford a 35 and not keen on a 31...

32 33 or 34

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300702
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

There is no golden answer other than this:

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300792
Share on other sites

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300811
Share on other sites

this is my personal view on the topic...

if all 3 were brand new and had identical mods done, including supporting mods, they would all end up with about the same power.

if you then gave them all the same power, same gear ratios, same WEIGHT - then they will go as well as either or.

so in the end, engine condition, weight, ratios in no order make up the winning combo assuming power is equal.

k, done. lock.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300835
Share on other sites

Yer but do you need more money and parts to make a 32 rb26 put out the same as a r34rb26?

What I'm saying is I spend $2000 on a power fc some injectors and a tune and your saying all 3 models will put

Out roughly the same kws? Etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300842
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300845
Share on other sites

So, where does this magical 30 HP come from?

The cosmos of course

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

How?

The R34 is heavier. The R33 is heavier.

So once again....

The one with ... least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300873
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

L2belessserious

Lol

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...