Jump to content
SAU Community

Recommended Posts

Hi all,

I was wondering if any one could possible shed some light on an issue I've recently discovered. Not sure if it's an issue or normal behaviour.

I've got an 09 GTR totally stock accept a willall mid pipe. I've taken it out for a burst, and once i got it up to temp I have gone to boost out of a corner in second gear it's bogged down or like cut out straight away at a low RPM just as the turbos are spooling up. The traction control light flashes but I haven't noticed any wheel spin. I tried it again and It did it again, and then after that it spooled as normal with no issues. I'm hoping that maybe the tires were cold and traction control kicked in, but I'm not sure. Tires have only done 3k so plenty of meat left...

Has any one else noticed this cutting out ever with their GTR?

Could it be just cold tires, or maybe something more sinister.

Any advice would be appreciated. Cars still under warranty for not long so if it's a warranty issue I need to get it back Asap

cheers

Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/
Share on other sites

It sounds like traction control / cold tyres etc. I've had this many times (with VDC on) well before you can detect actual wheelspin yourself. One way to test it would be to turn off VDC and take it for a spin again. My bet it doesn't happen, but wheel spins instead.

Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/#findComment-6306825
Share on other sites

Lol you guys talking about auto and manual mode.

It's all auto.

LOL auto? Obviously you havn't driven one yet, it's the most amazing supercar on the market. Auto's have a torque converter this has none. It runs a clutch similar to the old school method times 2 and it's the speed of the shift that makes all the difference!

*flame on, Johnny cash

Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/#findComment-6314048
Share on other sites

LOL auto? Obviously you havn't driven one yet, it's the most amazing supercar on the market. Auto's have a torque converter this has none. It runs a clutch similar to the old school method times 2 and it's the speed of the shift that makes all the difference!

tumblr_m2dysm3I3s1qh0yhxo2_500.jpg

Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/#findComment-6314131
Share on other sites

Lol you guys talking about auto and manual mode.

It's all auto.

*flame on, Johnny cash

When it's written on the shifter Auto and Manual mode how else are you going to describe it to someone. The characteristics of the vehicle change dramatically when shifted to each mode. Its a Auto when in Auto mode and its a manual with no foot operated clutch when in Manual mode. If you can convince me that a manual is not a manual unless it has a clutch pedal then its not a manual.

Edited by g35me
Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/#findComment-6319416
Share on other sites

tumblr_m2dysm3I3s1qh0yhxo2_500.jpg

I lol'd.

No shit brainiac

Sorry did I touch a nerve?

When it's written on the shifter Auto and Manual mode how else are you going to describe it to someone. The characteristics of the vehicle change dramatically when shifted to each mode. Its a Auto when in Auto mode and its a manual with no foot operated clutch when in Manual mode. If you can convince me that a manual is not a manual unless it has a clutch pedal then its not a manual.

Hmmm... how about hey Im in auto, and then hey Im in sports auto. Goin all manual without my gear selector nor clutch.

You guys bit too easy. Im not challenging the size of your penis, Im just saying dont think for you have a manual car because it says so. Shit I can go and put a GTR badge on my cat, still wont make her flutter!

Edited by eat_me
Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/#findComment-6319538
Share on other sites

Hmmm... how about hey Im in auto, and then hey Im in sports auto. Goin all manual without my gear selector nor clutch.

You guys bit too easy. Im not challenging the size of your penis, Im just saying dont think for you have a manual car because it says so. Shit I can go and put a GTR badge on my cat, still wont make her flutter!

Thanks for the tip.. So actually my car is an Auto?? Who would a thought, all this time ive been driving my car in manual mode I didnt have to use my left foot to push the clutch... So what was I pushing?? The brake?? fark me that explains the problem with the car cutting out.. Thanks for your immense wisdom in clarifying the issue. Much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/#findComment-6319705
Share on other sites

Thanks for the tip.. So actually my car is an Auto?? Who would a thought, all this time ive been driving my car in manual mode I didnt have to use my left foot to push the clutch... So what was I pushing?? The brake?? fark me that explains the problem with the car cutting out.. Thanks for your immense wisdom in clarifying the issue. Much appreciated.

Shit man, you must go back to driving school if you were doing that!

Haha, dont get so sensitive. Just take a breath and realise that Im right and your wrong.

Link to comment
https://www.sau.com.au/forums/topic/397195-r35-cutting-out/#findComment-6319948
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...