Jump to content
SAU Community

Recommended Posts

Hope this is the right area.

Was on gumtree this morning looking for skylines as usual, and there must've been a shipment of imports because there was a few skylines and evos uploaded from wangara (car shop suburb for all you non WA people)

I did find a two stock R34s which I was so happy to see. however the manual was 18k and the Auto was 11k :(

This seems way to expensive, are they overcharging? Because if I could get that auto cheap I'd just do an Auto to manual conversion with an r33 gearbox and follow an old thread I found on here :)

So what is the currrent value for auto and manual R34s (stock) that you guys think?

Link to comment
https://www.sau.com.au/forums/topic/397491-value-of-auto-r34-gtt/
Share on other sites

labour isnt really a problem, dad rebuilt a few cars, I'm not afraid to get my hands dirty, and cousin owns a repair shop with a hoist. And I'm not looking to increase the value. I just hate auto's with a passion :)

ok a few things, there will be a big difference in the value of cars that are the same. you may get 2 r34's, both manual, etc that are vastly different in price. a lot of this will come down to general condition of the car. some will also come down to one owner being more eager to sell his car than the other.

as for the auto vs manual price difference, there will always be a difference in price. the 18k manual one is at the upper end of the price range. you will certainly find cheaper ones around. unless you could get the auto for a lot less than 11k i wouldn't bother doing a conversion. for starters, parts will cost you a few thousand dollars to do it properly. will still cost you a few grand to do a half arse job. then there is all the dicking around with getting the wiring sorted so that the ecu uses the right maps (most people don't do this).

i would also say the same thing about importing a car vs buying locally. don't bother importing. buy locally. that way you can personally go and inspect the car, take it for a drive and see what it's like. you can inspect the body, listen to the engine and get a general feel for what sort of condition it's in rather than just taking someone elses word for it.

you may also want to do plenty of research of running costs and maintainence costs of a turbo car before you get too far in the process. things like how expensive insurance will be (a lot for a young driver), running it on premium unleaded, regular oil changes, etc. plus the cost of fixing common problems such as failing coil packs. they aren't for everyone.

yeh I am, I dont get why there's such a huge price jump from R33s to R34s... There was a gtst R33 for $3500 on carsales in FEB that I saw.

Basic Rule:- Production Numbers of the R34 were much less than the R33 > Join the dots.

BTW, welcome to SAU

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...